This appendix provides an example of how to configure a typical shared-disk cluster using sybcluster. See Table C-1for the configuration values used in the example session.
This example assumes a primary and secondary network.
If you do not specify a primary network, sybcluster asks
for a beginning port number and calculates the number of port numbers
needed for communication among the instances. Ensure that the number
you provide, and the following required port numbers, are not in
use by another application. For information on about how sybcluster calculates
the number of required ports, see “Creating the cluster using sybcluster”.
Parameter |
Value |
|
|---|---|---|
Cluster name |
|
|
Number of instances |
||
Maximum number of nodes |
||
Cluster node ID |
|
|
Quorum Device |
||
Full path and name for the quorum device |
|
|
Master device |
||
Full path and name for the master device |
|
|
Size of master device [80MB] |
|
|
Size of master database [60MB] |
|
|
Instance page size in kilobytes [4] |
|
|
Sybase system procedure device |
||
Full path and name for sybsystemprocs device |
|
|
Size of sybsystemprocs device (MB) |
|
|
Size of sybsystemprocs database (135) |
|
|
System database device |
||
Full path and name of system database device |
|
|
Size of system database device (MB) |
|
|
Size of system database (MB) |
|
|
---------- |
||
Does this cluster have a secondary network [Y] |
|
|
Verify file locations |
||
The location of the SYBASE home directory |
|
|
Full path to environment variable script |
|
|
Path to $SYBASE_ASE |
|
|
Path to interfaces file directory |
|
|
Path to the dataserver configuration file |
|
|
Instance information |
||
Node name |
|
|
sybcluster displays: |
||
Instance name |
|
|
Query port number for ase1 |
|
|
Primary protocol address for ase1 |
|
|
Secondary protocol address for ase1 |
|
|
Local system temporary database |
||
Local system temporary database device name (Enter the name of the Adaptive Server database device for the local system temporary database.) You must use a shared disk for local system temporary database devices. |
|
|
Path to local system temporary database device |
|
|
Local system temporary database device size (MB) |
|
|
Local system temporary database name |
|
|
Local system temporary database size (MB) |
|
|
---------- |
||
Do you want to add another instance (Y or N) |
|
|
Node name |
|
|
sybcluster displays: |
||
Instance name |
|
|
Query port number for ase2 |
|
|
Primary protocol address for ase2 |
|
|
Secondary protocol address for ase2 |
|
|
Local system temporary database |
||
Local system temporary database device name (Enter the name of the Adaptive Server database device for the local system temporary database.) You must use a shared disk for local system temporary database devices. |
|
|
Path to local system temporary database device |
|
|
Local system temporary database device size (MB) |
|
|
Local system temporary database name |
|
|
Local system temporary database size (MB) |
|
|
---------- |
||
Do you want to add another instance (Y or N) |
|
|
Node name |
|
|
sybcluster displays: |
||
Instance name |
|
|
Query port number |
|
|
Primary protocol address for ase3 |
|
|
Secondary protocol address for ase3 |
|
|
Local system temporary database |
||
Local system temporary database device name (Enter the name of the Adaptive Server database device for the local system temporary database.) You must use a shared disk for local system temporary database devices. |
|
|
Path to local system temporary database device |
|
|
Local system temporary database device size (MB) |
|
|
Local system temporary database name |
|
|
Local system temporary database size (MB) |
|
|
---------- |
||
Do you want to add another instance (Y or N) |
|
|
Save configuration information in a file [Y] |
|
|
Full path for configuration file |
|
|
Create the cluster now [Y] |
|
|
Check whether each cluster device has IO fencing capability? [Y] |
||
