dump database  execute

Chapter 1: Commands

dump transaction

Description

Makes a copy of a transaction log and removes the inactive portion.

Syntax

To make a routine log dump:

dump tran[saction] database_name  
	to [compress::[compression_level::]]stripe_device
		[at backup_server_name]
		[density = density_value, 
		blocksize = number_bytes,
		capacity = number_kilobytes, 
		dumpvolume = volume_name,
		file = file_name]
	[stripe on [compress::[compression_level::]]stripe_device
		[at backup_server_name]
		[density = density_value, 
		blocksize = number_bytes,
		capacity = number_kilobytes, 
		dumpvolume = volume_name,
		file = file_name]]
	[[stripe on [compress::[compression_level::]]stripe_device 
		[at backup_server_name]
		[density = density_value, 
		blocksize = number_bytes,
		capacity = number_kilobytes, 
		dumpvolume = volume_name,
		file = file_name] ]...]
	[with { 
		density = density_value, 
		blocksize = number_bytes,
		capacity = number_kilobytes, 
		compression = compress_level,
		dumpvolume = volume_name,
		file = file_name,
		[dismount | nodismount],
		[nounload | unload],
		retaindays = number_days,
		[noinit | init],
		notify = {client | operator_console}, 
		standby_access }]

To truncate the log without making a backup copy:

dump tran[saction] database_name  
	with truncate_only

To truncate a log that is filled to capacity. Use only as a last resort:

dump tran[saction] database_name  
	with no_log 

To back up the log after a database device fails:

dump tran[saction] database_name  
	to [compress::[compression_level::]]stripe_device
		[at backup_server_name]
		[density = density_value, 
		blocksize = number_bytes,
		capacity = number_kilobytes, 
		dumpvolume = volume_name,
		file = file_name]
	[stripe on [compress::[compression_level::]]stripe_device 
		[at backup_server_name]
		[density = density_value, 
		blocksize = number_bytes,
		capacity = number_kilobytes, 
		dumpvolume = volume_name,
		file = file_name]]
	[[stripe on [compress::[compression_level::]]stripe_device
		[at backup_server_name]
		[density = density_value, 
		blocksize = number_bytes,
		capacity = number_kilobytes, 
		dumpvolume = volume_name,
		file = file_name] ]...]
	[with { 
		density = density_value, 
		blocksize = number_bytes,
		capacity = number_kilobytes, 
		compression = compress_level
		dumpvolume = volume_name,
		file = file_name,
		[dismount | nodismount],
		[nounload | unload],
		retaindays = number_days,
		[noinit | init],
		no_truncate, 
		notify = {client | operator_console}}]

Parameters

database_name

is the name of the database from which you are copying data. The name can be given as a literal, a local variable, or a parameter to a stored procedure.

compress::compression_level

is a number between 0 and 9, with 0 indicating no compression, and 9 providing the highest level of compression. If you do not specify compression_level, the default is 1. For more information about the compress option, see Chapter 27, “Backing Up and Restoring User Databases” in the System Administration Guide.

NoteThe compression = compress_level option allows you to compress a dump file on both local and remote machines, and differs from the compress::compression_level option, which you can use only to compress a dump file on local machine. Beginning with Adaptive Server version 15.0, Sybase supports—and recommends—the native compression = compression_level syntax.

truncate_only

removes the inactive part of the log without making a backup copy. Use on databases without log segments on a separate device from data segments. Do not specify a dump device or Backup Server name.

no_log

removes the inactive part of the log without making a backup copy and without recording the procedure in the transaction log. Use no_log only when you are completely out of log space and cannot run the usual dump transaction command. Use no_log as a last resort and use it only once after dump transaction with truncate_only fails. For additional information, see the System Administration Guide.

to stripe_device

is the device to which data is being dumped. See “Specifying dump devices” for information about what form to use when specifying a dump device.

at backup_server_name

is the name of the Backup Server. Do not specify this parameter if you are dumping to the default Backup Server. Specify this parameter only if you are dumping over the network to a remote Backup Server. You can specify as many as 32 different remote Backup Servers using this option. When dumping across the network, specify the network name of a remote Backup Server running on the machine to which the dump device is attached. For platforms that use interfaces files, backup_server_name must appear in the interfaces file.

density = density_value

overrides the default density for a tape device. Valid densities are 800, 1600, 6250, 6666, 10000, and 38000. Not all values are valid for every tape drive; use the correct density for your tape drive.

blocksize = number_bytes

overrides the default block size for a dump device. The block size must be at least one database page (2048 bytes for most systems) and must be an exact multiple of the database page size.

NoteWhenever possible, use the default block size; it is the best block size for your system.

capacity = number_kilobytes

is the maximum amount of data that the device can write to a single tape volume. The capacity must be at least five database pages, and should be slightly less than the recommended capacity for your device.

A general rule for calculating capacity is to use 70 percent of the manufacturer’s maximum capacity for the device, leaving 30 percent for overhead such as record gaps and tape marks. This rule works in most cases, but may not work in all cases because of differences in overhead across vendors and devices.

On UNIX platforms that cannot reliably detect the end-of-tape marker, you must indicate how many kilobytes can be dumped to the tape. You must supply a capacity for dump devices specified as a physical path name. If a dump device is specified as a logical device name, the Backup Server uses the size parameter stored in the sysdevices system table, unless you specify a capacity.

compression = compress_level

is a number between 1 and 9, with 9 providing the highest level of compression. There is no default compression level; if you do not specify compression = compress_level, Adaptive Server does not compress the dump.

NoteSybase recommends the native "compression = compress_level" option as preferred over the older "compress::compression_level" option. The native option allows compression of both local and remote dumps, and the dumps that it creates will describe their own compression level during a load. The older option is retained for compatibility with older applications.

dumpvolume = volume_name

establishes the name that is assigned to the volume. The maximum length of volume_name is 6 characters. The Backup Server writes the volume_name in the ANSI tape label when overwriting an existing dump, dumping to a brand new tape, or dumping to a tape whose contents are not recognizable. The load transaction command checks the label and generates an error message if the wrong volume is loaded.

stripe on stripe_device

is an additional dump device. You can use up to 32 devices, including the device named in the to stripe_device clause. The Backup Server splits the log into approximately equal portions and sends each portion to a different device. Dumps are made concurrently on all devices, reducing the time and the number of volume changes required. See “Specifying dump devices” for information about how to specify a dump device.

dismount | nodismount

on platforms that support logical dismount – determines whether tapes remain mounted. By default, all tapes used for a dump are dismounted when the dump completes. Use nodismount to keep tapes available for additional dumps or loads.

nounload | unload

determines whether tapes rewind after the dump completes. By default, tapes do not rewind, allowing you to make additional dumps to the same tape volume. Specify unload for the last dump file to be added to a multidump volume. This rewinds and unloads the tape when the dump completes.

retaindays = number_days

on UNIX platforms – specifies the number of days that Backup Server protects you from overwriting a dump. If you try to overwrite a dump before it expires, Backup Server requests confirmation before overwriting the unexpired volume.

NoteThis option is meaningful for disk, 1/4-inch cartridge, and single-file media. On multifile media, this option is meaningful for all volumes except the first.

The number_days must be a positive integer or 0, for dumps you can overwrite immediately. If you do not specify a retaindays value, Backup Server uses the server-wide tape retention in days value, set by sp_configure.

noinit | init

determines whether to append the dump to existing dump files or reinitialize (overwrite) the tape volume. By default, Adaptive Server appends dumps following the last end-of-tape mark, allowing you to dump additional databases to the same volume. New dumps can be appended only to the last volume of a multivolume dump. Use init for the first database you dump to a tape, to overwrite its contents.

Use init when you want Backup Server to store or update tape device characteristics in the tape configuration file. For more information, see the System Administration Guide.

file = file_name

is the name of the dump file. The name cannot exceed 17 characters and must conform to operating system conventions for file names. If you do not specify a file name, Backup Server creates a default file name. For more information, see “Dump files”.

no_truncate

dumps a transaction log, even if the disk containing the data segments for a database is inaccessible, using a pointer to the transaction log in the master database. The with no_truncate option provides up-to-the-minute log recovery when the transaction log resides on an undamaged device, and the master database and user databases reside on different physical devices.

If you use dump tran with no_truncate you must follow it with dump database, not with another dump tran. If you load a dump generated using the no_truncate option, Adaptive Server prevents you from loading any subsequent dump.

notify = {client | operator_console}

overrides the default message destination.

with standby_access

specifies that only completed transactions are to be dumped. The dump continues to the furthest point it can find at which a transaction has just completed and there are no other active transactions.

Examples

Example 1

Dumps the transaction log to a tape, appending it to the files on the tape, since the init option is not specified:

dump transaction pubs2 
    to "/dev/nrmt0"

Example 2

Dumps the transaction log for the mydb database, using the Backup Server REMOTE_BKP_SERVER. The Backup Server dumps approximately half the log to each of the two devices. The init option overwrites any existing files on the tape. The retaindays option specifies that the tapes cannot be overwritten for 14 days:

dump transaction mydb
    to "/dev/nrmt4" at REMOTE_BKP_SERVER
    stripe on "/dev/nrmt5" at REMOTE_BKP_SERVER
with init, retaindays = 14

Example 3

Dumps completed transactions from the inventory_db transaction log file to device dev1:

dump tran inventory_db to dev1 with standby_access

Usage


Restrictions


Copying the log after device failure


Dumping databases without separate log segments


Dumping only complete transactions


Dumping without the log

WARNING! Use dump transaction with no_log only as a last resort, after your usual method of dumping the transaction log (dump transaction or dump transaction with truncate_only) fails because of insufficient log space. dump transaction with no_log provides no means to recover your databases. Run dump database at the earliest opportunity to ensure recoverability.


Scheduling dumps


Using thresholds to automate dump transaction


Specifying dump devices


Determining tape device characteristics


Backup servers


Dump files


Volume names


Changing dump volumes


Appending to or overwriting a volume


Dumping logs stored on mirrored devices

Standards

ANSI SQL – Compliance level: Transact-SQL extension.

Permissions

Only System Administrators, users who have been granted the Operator role, and the Database Owner can execute dump transaction.

Auditing

Values in event and extrainfo columns of sysaudits are:

Event

Audit option

Command or access audited

Information in extrainfo

35

dump

dump transaction

  • Roles – Current active roles

  • Keywords or options – NULL

  • Previous value – NULL

  • Current value – NULL

  • Other information – NULL

  • Proxy information – Original login name, if set proxy in effect

See also

Documents Chapter 28, “Backing Up and Restoring User Databases” in the System Administration Guide.

Commands dump database, load database, load transaction, online database

System procedures sp_addumpdevice, sp_dboption, sp_dropdevice, sp_helpdevice, sp_hidetextsp_logdevice, sp_volchanged





Copyright © 2005. Sybase Inc. All rights reserved. execute

View this book as PDF