Introduction  Setting the ims wrapper script path

Chapter 2: Configuring the Global Console

Configuring the Global Console

Before you use the Global Console to monitor your e-Biz Impact cluster activity, you must perform these configuration steps:

  1. If you implement e-Biz Impact security, you must set up the Adaptive Server Anywhere authorization database on the e-Biz Impact server prior to configuring the Global Console. See the e-Biz Impact Authorization Guide for instructions.

  2. Add the ims wrapper script location to the path where the cluster will run. See “Setting the ims wrapper script path”.

  3. Configure the directory for the port that the SNMP service or daemon uses. See “Configuring the SNMP port directory”.

  4. Start the SNMP EMANATE Master Agent. See “Starting the SNMP EMANATE Master Agent”.

  5. Configure e-Biz Impact clusters to publish telemetry to the SNMP service. See “Configuring clusters to publish SNMP telemetry”.

  6. Start the cluster. See “Starting clusters”.

  7. Start the Global Console. See “Starting the Global Console”.

  8. Create an SNMP agent for each cluster you want to monitor. See “Creating SNMP agents”.




Copyright © 2005. Sybase Inc. All rights reserved. Setting the ims wrapper script path

View this book as PDF