System variables with the suffix “EDIOUT” are the system variables that support the EDI-to-EDI mapping feature introduced with EDI 5.0. See “System variables for outbound EDI-to-EDI transactions” for more information.
Name |
Size |
Type |
Description |
|---|---|---|---|
ABORT_GROUP |
1 |
AN |
Flag that specifies that an entire functional group should be aborted, on an outbound map. |
ABORT_GROUP_EDIOUT |
1 |
AN |
Flag that specifies that an entire functional group should be aborted, on an EDI-to-EDI map. |
ABORT_INTERCHANGE |
1 |
AN |
Flag that specifies that an entire interchange should be aborted, on an outbound map. |
ABORT_INTERCHANGE_EDIOUT |
1 |
AN |
Flag that specifies that an entire interchange should be aborted, on an EDI-to-EDI map. |
ACK_INTCH |
1 |
AN |
Flag that specifies whether an EDIFACT interchange-level acknowledgement is expected from the receiver of an outbound map:
When ACK_INTCH is 1, the program populates the field in the outgoing EDIFACT UNB envelope that requests the receiver to return an interchange-level acknowledgement. Loaded from on outbound: tradstat/ACK_RQSTD. Loaded to on outbound: EDIFACT: UNB S005 0031. |
ACK_INTCH_EDIOUT |
1 |
AN |
Flag that specifies whether an EDIFACT interchange-level acknowledgement is expected from the receiver of an outbound map:
When ACK_INTCH is 1, the program populates the field in the outgoing EDIFACT UNB envelope that requests the receiver to return an interchange-level acknowledgement. Loaded from an EDI-to-EDI map: tradstat/ACK_RQSTD. Loaded to an EDI-to-EDI map: EDIFACT: UNB S005 0031. |
ACK_MSG |
1 |
AN |
Flag that specifies whether an EDIFACT message-level acknowledgement is expected from the receiver of an outbound map:
|
ACK_MSG_EDIOUT |
1 |
AN |
Flag that specifies whether an EDIFACT message-level acknowledgement is expected from the receiver of an EDI-to-EDI map:
|
ACK_REQSTD |
1 |
AN |
Flag that specifies whether an X12 TA1 interchange-level acknowledgement is expected from the receiver of an outbound map:
When ACK_REQSTD is 1, the program populates the field in the outgoing X12 ISA envelope that requests the receiver to return an interchange-level acknowledgement. Loaded from on outbound: tradstat/ACK_RQSTD. Loaded to on outbound: X12: ISA 14. |
ACK_REQSTD_EDIOUT |
1 |
AN |
Flag that specifies whether an X12 TA1 interchange-level acknowledgement is expected from the receiver of an outbound map:
When ACK_REQSTD is 1, the program populates the field in the outgoing X12 ISA envelope that requests the receiver to return an interchange-level acknowledgement. Loaded from an EDI-to-EDI map: tradstat/ACK_RQSTD. Loaded to an EDI-to-EDI map: X12: ISA 14. |
APP_PASSWORD |
14 |
AN |
Password on the group-level envelope. Loaded to on outbound/loaded from on inbound: EDIFACT: UNB S005 0022. |
APP_PASSWORD_EDIOUT |
14 |
AN |
Password on the group-level envelope. Loaded to an EDI-to-EDI map/loaded from on inbound: EDIFACT: UNB S005 0022. |
APP_RECV_CODE |
35 |
AN |
Receiver ID code on the group-level envelope.Loaded from on outbound: tp/GSID (if blank, use tradstat/RCV_GSID). Loaded to on outbound/loaded from on inbound: X12: GS 03.EDIFACT: UNB S003 0046. UNG S007 0044.HL7: MSH 0006. FHS 0072. BHS 0086. |
APP_RECV_CODE_EDIOUT |
35 |
AN |
Receiver ID code on the group-level envelope.Loaded from an EDI-to-EDI map: tp/GSID (if blank, use tradstat/RCV_GSID). Loaded to an EDI-to-EDI map/loaded from on inbound: X12: GS 03.EDIFACT: UNB S003 0046. UNG S007 0044.HL7: MSH 0006. FHS 0072. BHS 0086. |
APP_RECV_QUAL |
4 |
AN |
Receiver ID code qualifier on the group-level envelope. Loaded to on outbound/loaded from on inbound: EDIFACT: UNG S007 0007. |
APP_RECV_QUAL_EDIOUT |
4 |
AN |
Receiver ID code qualifier on the group-level envelope. Loaded to an EDI-to-EDI map/loaded from on inbound: EDIFACT: UNG S007 0007. |
APP_SEND_CODE |
35 |
AN |
Sender ID code on the group-level envelope. Loaded from on outbound: tp/SND_GSID (if blank, use wixset/WIX_GSID). Loaded to on outbound/loaded from on inbound: X12: GS 02. EDIFACT: UNB S002 0042. UNG S006 0040. HL7: MSH 0004. FHS 0070. BHS 0084. |
APP_SEND_CODE_EDIOUT |
35 |
AN |
Sender ID code on the group-level envelope. Loaded from on EDI-to-EDI outbound: tp/SND_GSID (if blank, use wixset/WIX_GSID). Loaded to an EDI-to-EDI map/loaded from on inbound: X12: GS 02. EDIFACT: UNB S002 0042. UNG S006 0040. HL7: MSH 0004. FHS 0070. BHS 0084. |
APP_SEND_QUAL |
4 |
AN |
Sender ID code qualifier on the group-level envelope. Loaded to on outbound/loaded from on inbound: EDIFACT: UNG S006 0007. |
APP_SEND_QUAL_EDIOUT |
4 |
AN |
Sender ID code qualifier on the group-level envelope. Loaded to an EDI-to-EDI map/loaded from on inbound: EDIFACT: UNG S006 0007. |
ASSOC_CODE |
6 |
AN |
Associate assigned code. |
ASSOC_CODE_EDIOUT |
6 |
AN |
Associate assigned code. |
AUTH_CODE |
15 |
AN |
Trading partner authorization ID code. Loaded from on outbound: tp/AUTH_CODE. Loaded to on outbound/loaded from on inbound: X12: ISA 02. |
AUTH_CODE_EDIOUT |
15 |
AN |
Trading partner authorization ID code. Loaded from an EDI-to-EDI map: tp/AUTH_CODE. Loaded to an EDI-to-EDI map/loaded from on inbound: X12: ISA 02. |
AUTH_QUAL |
2 |
AN |
Trading partner authorization ID code qualifier. Loaded from on outbound: tp/AUTH_QUAL (if blank, use “00” for X12 and null for EDIFACT). Loaded to on outbound/loaded from on inbound: X12: ISA 01. |
AUTH_QUAL_EDIOUT |
2 |
AN |
Trading partner authorization ID code qualifier. Loaded from an EDI-to-EDI map: tp/AUTH_QUAL (if blank, use “00” for X12 and null for EDIFACT). Loaded to an EDI-to-EDI map/loaded from on inbound: X12: ISA 01. |
B_RECV_ID |
24 |
AN |
Batch receiver ID. |
B_RECV_ID_EDIOUT |
24 |
AN |
Batch receiver ID. |
B_SEND_ID |
24 |
AN |
Batch sender ID. |
B_SEND_ID_EDIOUT |
24 |
AN |
Batch sender ID. |
B_VERS |
2 |
AN |
Batch version. |
B_VERS_EDIOUT |
2 |
AN |
Batch version. |
BIN_NUMB |
6 |
AN |
Bin number. |
BIN_NUMB_EDIOUT |
6 |
AN |
Bin number. |
CHANGE_LEVEL |
4 |
UI |
Change outbound flow level. Assigned by user on outbound. When the user assigns a new value to CHANGE_ LEVEL in a rule command, the program first processes the rule, then goes to the new level specified in CHANGE_LEVEL, and finally resets the value of CHANGE_LEVEL to spaces. (CHANGE_LEVEL and COMBINED_BREAK are used in rule commands to control map flow processing on outbound maps.) |
CHANGE_LEVEL_EDIOUT |
4 |
UI |
Change EDI-to-EDI map flow level. Assigned by user on outbound. When the user assigns a new value to CHANGE_ LEVEL in a rule command, the program first processes the rule, then goes to the new level specified in CHANGE_LEVEL, and finally resets the value of CHANGE_LEVEL to spaces. (CHANGE_LEVEL and COMBINED_BREAK are used in rule commands to control map flow processing on EDI-to-EDI maps.) |
CLIST_VER |
6 |
AN |
Code List Directory Version Number. EDIFACT: UNH S009 0110. |
CLIST_VER_EDIOUT |
6 |
AN |
Code List Directory Version Number. EDIFACT: UNH S009 0110. |
CNT_AG1 |
3 |
AN |
Controlling Agency, Coded. EDIFACT: UNH S009 0051. |
CNT_AG1_EDIOUT |
3 |
AN |
Controlling Agency, Coded. EDIFACT: UNH S009 0051. |
CNT_AG2 |
3 |
AN |
Controlling Agency, Coded. EDIFACT: UNH S016 0051. |
CNT_AG2_EDIOUT |
3 |
AN |
Controlling Agency, Coded. EDIFACT: UNH S016 0051. |
CNT_AG3 |
3 |
AN |
Controlling Agency, Coded. EDIFACT: UNH S017 0051. |
CNT_AG3_EDIOUT |
3 |
AN |
Controlling Agency, Coded. EDIFACT: UNH S017 0051. |
CNT_AG4 |
3 |
AN |
Controlling Agency, Coded. EDIFACT: UNH S018 0051. |
CNT_AG4_EDIOUT |
3 |
AN |
Controlling Agency, Coded. EDIFACT: UNH S018 0051. |
COMBINED_BREAK |
1 |
UI |
End-of-file (EOF) indicator. Used in the master level I/O rule to do EOF processing if COMBINED_BREAK = 1 and (with CHANGE_LEVEL) to help control map flow processing when a parent level has multiple child levels that repeat in an undetermined order. Generated by the program on outbound: After a successful read, COMBINED_BREAK is set to blank. After an unsuccessful read (record type changes when reading a file with multiple record types), COMBINED_BREAK is set to 1. User-assigned value on inbound: When this variable is set to 1 and EOF is reached for an inbound EDI file, the user can create a rule and attach it to the end-of-outer-envelope flow level to clean up processing. |
COMBINED_BREAK_EDIOUT |
1 |
UI |
End-of-file (EOF) indicator. Used in the master level I/O rule to do EOF processing if COMBINED_BREAK = 1 and (with CHANGE_LEVEL) to help control map flow processing when a parent level has multiple child levels that repeat in an undetermined order. Generated by the program on EDI-to-EDI map: After a successful read, COMBINED_BREAK is set to blank. After an unsuccessful read (record type changes when reading a file with multiple record types), COMBINED_BREAK is set to 1. User-assigned value on inbound: When this variable is set to 1 and EOF is reached for an inbound EDI file, the user can create a rule and attach it to the end-of-outer-envelope flow level to clean up processing. |
COMM_AC_REF |
35 |
AN |
Common access reference. User-assigned value for outbound use. Loaded to on outbound/loaded from on inbound: EDIFACT: UNB S005 0026. |
COMM_AC_REF_EDIOUT |
35 |
AN |
Common access reference. User-assigned value for EDI-to-EDI map use. Loaded to an EDI-to-EDI map/loaded from on inbound: EDIFACT: UNB S005 0026. |
COMM_AGM_ID |
35 |
AN |
Communication agreement ID. User-assigned value for outbound use. Loaded to on outbound/loaded from on inbound: EDIFACT: UNB S005 0032. |
COMM_AGM_ID_EDIOUT |
35 |
AN |
Communication agreement ID. User-assigned value for EDI-to-EDI outbound use. Loaded to an EDI-to-EDI map/loaded from on inbound: EDIFACT: UNB S005 0032. |
CONTACT1 |
35 |
AN |
Name of trading partner contact #1. Loaded from on inbound: tp/CONTACT1. |
CONTACT1_EDIOUT |
35 |
AN |
Name of trading partner contact #1. Loaded from on inbound: tp/CONTACT1. |
CONTACT2 |
35 |
AN |
Name of trading partner contact #2. Loaded from on inbound: tp/CONTACT2. |
CONTACT2_EDIOUT |
35 |
AN |
Name of trading partner contact #2. Loaded from on inbound: tp/CONTACT2. |
DATA_ELEM_SEP |
1 |
AN |
X12 element delimiter. Loaded from on outbound: tp/ELE_DELIMT (if blank, the program uses the default). Loaded from on inbound: ISA Column 4. |
DATA_ELEM_SEP_EDIOUT |
1 |
AN |
X12 element delimiter. Loaded from an EDI-to-EDI map: tp/ELE_DELIMT (if blank, the program uses the default). Loaded from on inbound: ISA Column 4. |
EDFT_A_COMP_SEP |
1 |
AN |
EDIFACT composite element delimiter – syntax A. (The syntax identifier is in UNB S001 0002.) Loaded from on outbound/loaded to on inbound: tp/EDIF_SUBDL (if blank, the program uses the default). Loaded to on outbound/loaded from on inbound: UNA Column 4. Changing this value affects the envelope because the same information is loaded into an internal program variable and that variable is used to populate the envelopes. |
EDFT_A_COMP_SEP_EDIOUT |
1 |
AN |
EDIFACT composite element delimiter – syntax A. (The syntax identifier is in UNB S001 0002.) Loaded from an EDI-to-EDI map/loaded to on inbound: tp/EDIF_SUBDL (if blank, the program uses the default). Loaded to an EDI-to-EDI map/loaded from on inbound: UNA Column 4. Changing this value affects the envelope because the same information is loaded into an internal program variable and that variable is used to populate the envelopes. |
EDFT_A_DEC_IND |
1 |
AN |
EDIFACT decimal indicator – syntax A. (The syntax identifier is in UNB S001 0002.) Loaded from on outbound/loaded to on inbound: “.” (decimal point). Loaded to on outbound/loaded from on inbound: UNA Column 6. (Changing this value does not affect on the envelope because the same information is loaded into an internal program variable and that variable is used to populate the envelopes.) |
EDFT_A_DEC_IND_EDIOUT |
1 |
AN |
EDIFACT decimal indicator – syntax A. (The syntax identifier is in UNB S001 0002.) Loaded from an EDI-to-EDI map/loaded to on inbound: “.” (decimal point). Loaded to an EDI-to-EDI map/loaded from on inbound: UNA Column 6. (Changing this value does not affect on the envelope because the same information is loaded into an internal program variable and that variable is used to populate the envelopes.) |
EDFT_A_ELEM_SEP |
1 |
AN |
EDIFACT element delimiter – syntax A. (The syntax identifier is in UNB S001 0002.) Loaded from on outbound/loaded to on inbound: tp/EDIF_ELEDL (if blank, the program uses the default). Loaded to on outbound/loaded from on inbound: UNA Column 5. (Changing this value does not affect on the envelope because the same information is loaded into an internal program variable and that variable is used to populate the envelopes.) |
EDFT_A_ELEM_SEP_EDIOUT |
1 |
AN |
EDIFACT element delimiter – syntax A. (The syntax identifier is in UNB S001 0002.) Loaded from an EDI-to-EDI map/loaded to on inbound: tp/EDIF_ELEDL (if blank, the program uses the default). Loaded to an EDI-to-EDI map/loaded from on inbound: UNA Column 5. (Changing this value does not affect on the envelope because the same information is loaded into an internal program variable and that variable is used to populate the envelopes.) |
EDFT_A_REL_IND |
1 |
AN |
EDIFACT release character – syntax A. (The syntax identifier is in UNB S001 0002.) Loaded from on outbound/loaded to on inbound: tp/EDIF_RELCHL (if blank, the program uses the default). Loaded to on outbound/loaded from on inbound: UNA Column 7. (Changing this value does not affect on the envelope because the same information is loaded into an internal program variable and that variable is used to populate the envelopes.) |
EDFT_A_REL_IND_EDIOUT |
1 |
AN |
EDIFACT release character – syntax A. (The syntax identifier is in UNB S001 0002.) Loaded from an EDI-to-EDI map/loaded to on inbound: tp/EDIF_RELCHL (if blank, the program uses the default). Loaded to an EDI-to-EDI map/loaded from on inbound: UNA Column 7. (Changing this value does not affect on the envelope because the same information is loaded into an internal program variable and that variable is used to populate the envelopes.) |
EDFT_A_SEG_TERM |
1 |
AN |
EDIFACT segment delimiter – syntax A. (The syntax identifier is in UNB S001 0002.) Loaded from on outbound/loaded to on inbound: tp/EDIF_SEGDL (if blank, the program uses the default). Loaded to on outbound/loaded from on inbound: UNA Column 8. (Changing this value does not affect on the envelope because the same information is loaded into an internal program variable and that variable is used to populate the envelopes.) |
EDFT_A_SEG_TERM_EDIOUT |
1 |
AN |
EDIFACT segment delimiter – syntax A. (The syntax identifier is in UNB S001 0002.) Loaded from an EDI-to-EDI map/loaded to on inbound: tp/EDIF_SEGDL (if blank, the program uses the default). Loaded to an EDI-to-EDI map/loaded from on inbound: UNA Column 8. (Changing this value does not affect on the envelope because the same information is loaded into an internal program variable and that variable is used to populate the envelopes.) |
EDFT_B_COMP_SEP |
1 |
AN |
EDIFACT composite element delimiter – syntax B. (The syntax identifier is in UNB S001 0002.) Loaded from on outbound/loaded to on inbound: tp/EDIF_SUBDL (if blank, the program uses the default). Loaded to on outbound/loaded from on inbound: UNA Column 4. (Changing this value does not affect on the envelope because the same information is loaded into an internal program variable and that variable is used to populate the envelopes.) |
EDFT_B_COMP_SEP_EDIOUT |
1 |
AN |
EDIFACT composite element delimiter – syntax B. (The syntax identifier is in UNB S001 0002.) Loaded from an EDI-to-EDI map/loaded to on inbound: tp/EDIF_SUBDL (if blank, the program uses the default). Loaded to an EDI-to-EDI map/loaded from on inbound: UNA Column 4. (Changing this value does not affect on the envelope because the same information is loaded into an internal program variable and that variable is used to populate the envelopes.) |
EDFT_B_DEC_IND |
1 |
AN |
EDIFACT decimal indicator – syntax B. (The syntax identifier is in UNB S001 0002.) Loaded from on outbound/loaded to on inbound: “.” (decimal point). Loaded to on outbound/loaded from on inbound: UNA Column 6. (Changing this value does not affect on the envelope because the same information is loaded into an internal program variable and that variable is used to populate the envelopes.) |
EDFT_B_DEC_IND_EDIOUT |
1 |
AN |
EDIFACT decimal indicator – syntax B. (The syntax identifier is in UNB S001 0002.) Loaded from an EDI-to-EDI map/loaded to on inbound: “.” (decimal point). Loaded to an EDI-to-EDI map/loaded from on inbound: UNA Column 6. (Changing this value does not affect on the envelope because the same information is loaded into an internal program variable and that variable is used to populate the envelopes.) |
EDFT_B_ELEM_SEP |
1 |
AN |
EDIFACT element delimiter – syntax B. (The syntax identifier is in UNB S001 0002.) Loaded from on outbound/loaded to on inbound: tp/EDIF_ELEDL (if blank, the program uses the default). Loaded to on outbound/loaded from on inbound: UNA Column 5. (Changing this value does not affect on the envelope because the same information is loaded into an internal program variable and that variable is used to populate the envelopes.) |
EDFT_B_ELEM_SEP_EDIOUT |
1 |
AN |
EDIFACT element delimiter – syntax B. (The syntax identifier is in UNB S001 0002.) Loaded from an EDI-to-EDI map/loaded to on inbound: tp/EDIF_ELEDL (if blank, the program uses the default). Loaded to an EDI-to-EDI map/loaded from on inbound: UNA Column 5. (Changing this value does not affect on the envelope because the same information is loaded into an internal program variable and that variable is used to populate the envelopes.) |
EDFT_B_REL_IND |
1 |
AN |
EDIFACT release character – syntax B. (The syntax identifier is in UNB S001 0002.) Loaded from on outbound/loaded to on inbound: tp/EDIF_RELCHL (if blank, the program uses the default). Loaded to on outbound/loaded from on inbound: UNA Column 7. (Changing this value does not affect on the envelope because the same information is loaded into an internal program variable and that variable is used to populate the envelopes.) |
EDFT_B_REL_IND_EDIOUT |
1 |
AN |
EDIFACT release character – syntax B. (The syntax identifier is in UNB S001 0002.) Loaded from an EDI-to-EDI map/loaded to on inbound: tp/EDIF_RELCHL (if blank, the program uses the default). Loaded to an EDI-to-EDI map/loaded from on inbound: UNA Column 7. (Changing this value does not affect on the envelope because the same information is loaded into an internal program variable and that variable is used to populate the envelopes.) |
EDFT_B_SEG_TERM |
1 |
AN |
EDIFACT segment delimiter – syntax B. (The syntax identifier is in UNB S001 0002.) Loaded from on outbound/loaded to on inbound: tp/EDIF_SEGDL (if blank, the program uses the default). Loaded to on outbound/loaded from on inbound: UNA Column 8. (Changing this value does not affect on the envelope because the same information is loaded into an internal program variable and that variable is used to populate the envelopes.) |
EDFT_B_SEG_TERM_EDIOUT |
1 |
AN |
EDIFACT segment delimiter – syntax B. (The syntax identifier is in UNB S001 0002.) Loaded from an EDI-to-EDI map/loaded to on inbound: tp/EDIF_SEGDL (if blank, the program uses the default). Loaded to an EDI-to-EDI map/loaded from on inbound: UNA Column 8. (Changing this value does not affect on the envelope because the same information is loaded into an internal program variable and that variable is used to populate the envelopes.) |
EDI_OUT_FILENAME |
80 |
AN |
Read only. EDI output file name. On inbound: The file to which EDI data that is passed through is written and which is generated by the program using the run ID number. On outbound: The file to which the mapped EDI data is written. (This is parameter 1 on the command line or the entry in the Output EDI File text box on the Required tab of the Run Outbound Map window.) |
EDI_OUT_FILENAME_EDIOUT |
80 |
AN |
Read only. EDI output file name. On inbound: The file to which EDI data that is passed through is written and which is generated by the program using the run ID number. On EDI-to-EDI map: The file to which the mapped EDI data is written. (This is parameter 1 on the command line or the entry in the Output EDI File text box on the Required tab of the Run Outbound Map window.) |
EDI_START_FILENAME |
160 |
AN |
Input/output EDI file name. On inbound: The file from which the EDI input data is read. (This is the name of the EDI input file specified in the Input EDI File text box on the Required tab of the Run Inbound Map window or parameter 1on the command line.) On outbound: The file to which the mapped EDI data is written. (This is the name of the EDI input file specified in the Output EDI File text box on the Required tab of the Run Any-to-Any Map window or parameter 1on the command line.) |
EDI_START_FILENAME_EDIOUT |
160 |
AN |
Input/ output EDI-to-EDI file name. On inbound: The file from which the EDI input data is read. (This is the name of the EDI input file specified in the Input EDI File text box on the Required tab of the Run Inbound Map window or parameter 1on the command line.) On EDI-to-EDI map: The file to which the mapped EDI data is written. (This is the name of the EDI input file specified in the Output EDI File text box on the Required tab of the Run Any-to-Any Map window or parameter 1on the command line.) |
ERR_OCCURRED |
1 |
AN |
Flag to indicate if transaction errors occurred:
Generated by the program. Users can perform an action based on the value. |
ERR_OCCURRED_EDIOUT |
1 |
AN |
Flag to indicate if transaction errors occurred:
Generated by the program. Users can perform an action based on the value. |
FIRST_LAST_TRAN |
1 |
AN |
First and last transfers. Loaded to on outbound/loaded from on inbound: EDIFACT: S010 0073. |
FIRST_LAST_TRAN_EDIOUT |
1 |
AN |
First and last transfers. Loaded to an EDI-to-EDI map/loaded from on inbound: EDIFACT: S010 0073. |
FORM_FEED |
1 |
AN |
Form feed character – Ctrl+L. Loaded by the program. This unprintable character is available for users when they create reports, such as writing out the records in a file or the fields in a record. They can assign this system variable to an appropriate field in a record to execute form-feed action. |
FUNC_GP_DATE |
8 |
Date |
Date on group-level envelopes. Loaded with on outbound: Computer date. Loaded to an outbound/loaded from on inbound: X12: GS 04. EDIFACT: UNG S004 0017. |
FUNC_GP_DATE_EDIOUT |
8 |
Date |
Date on group-level envelopes. Loaded with an EDI-to-EDI map: Computer date. Loaded to an EDI-to-EDI map/loaded from on inbound: X12: GS 04. EDIFACT: UNG S004 0017. |
FUNC_GP_NUM |
35 |
AN |
Control/reference number on group-level envelopes. Loaded from on outbound: Tradstat/GS_NO. Loaded to on outbound/loaded from on inbound: X12: GS 06. EDIFACT: UNG S004 0048. |
FUNC_GP_NUM_EDIOUT |
35 |
AN |
Control/reference number on group-level envelopes. Loaded from an EDI-to-EDI map: Tradstat/GS_NO. Loaded to an EDI-to-EDI map/loaded from on inbound: X12: GS 06. EDIFACT: UNG S004 0048. |
FUNC_GP_TIME |
6 |
Time |
Time on group-level envelopes. Loaded with on outbound: Computer time. Loaded to on outbound/loaded from on inbound: X12: GS 05. EDIFACT: UNG S004 0019. |
FUNC_GP_TIME_EDIOUT |
6 |
Time |
Time on group-level envelopes. Loaded with an EDI-to-EDI map: Computer time. Loaded to an EDI-to-EDI map/loaded from on inbound: X12: GS 05. EDIFACT: UNG S004 0019. |
FUNC_ID |
6 |
AN |
Functional identifier code. Loaded to on outbound/loaded from on inbound: X12: GS 01. |
FUNC_ID_EDIOUT |
6 |
AN |
Functional identifier code. Loaded to an EDI-to-EDI map/loaded from on inbound: X12: GS 01. |
FUNC_ST_CHG |
35 |
AN |
Indicator that the transaction has changed. Generated by the program to: Trigger a trading partner lookup and potentially create a new ISA or GS envelope (used with FUNC_ST_REF). |
FUNC_ST_REF |
35 |
AN |
Value of ST 03. Supplied by the user on outbound as the value in the -s3 switch. Loaded to on outbound/loaded from on inbound: X12: ST 03. |
FUNC_ST_REF_EDIOUT |
35 |
AN |
Value of ST 03. Supplied by the user an EDI-to-EDI map as the value in the -s3 switch. Loaded to an EDI-to-EDI map/loaded from on inbound: X12: ST 03. |
INB_CURR_SEG |
3 |
AN |
Inbound current segment. Captured by the program each time it does an inbound read. Users can use the value of this system variable when they are performing additional compliance checks. |
INB_PRIOR_SEG |
3 |
AN |
Inbound prior segment. Captured by the program each time it does an inbound read. Users can use the value of this system variable when they are performing additional compliance checks. |
INT_FORMAT |
4 |
AN |
This is the Interchange Header Segment format. This is the value in ISA11. It is used for inbound purposes. |
INT_FORMAT_EDIOUT |
4 |
AN |
This is the Interchange Header Segment format. This is the value in ISA11. It is used for inbound purposes. |
INT_HEAD_DATE |
8 |
Date |
Date on interchange-level envelopes. Loaded with on outbound: Computer date. Loaded to on outbound/loaded from on inbound: X12: ISA 09. EDIFACT: UNB S004 0017. |
INT_HEAD_DATE_EDIOUT |
8 |
Date |
Date on interchange-level envelopes. Loaded with an EDI-to-EDI map: Computer date. Loaded to an EDI-to-EDI map/loaded from on inbound: X12: ISA 09. EDIFACT: UNB S004 0017. |
INT_HEAD_NUM |
35 |
AN |
Control/reference number on interchange-level envelopes. Loaded from on outbound: Tradstat/GS_NO. Loaded to on outbound/loaded from on inbound: X12: ISA 13. EDIFACT: UNB S004 0048. |
INT_HEAD_NUM_EDIOUT |
35 |
AN |
Control/reference number on interchange-level envelopes. Loaded from an EDI-to-EDI map: Tradstat/GS_NO. Loaded to an EDI-to-EDI map/loaded from on inbound: X12: ISA 13. EDIFACT: UNB S004 0048. |
INT_HEAD_TIME |
6 |
Time |
Time on interchange-level envelopes. Loaded with on outbound: Computer time. Loaded to on outbound/loaded from on inbound: X12: ISA 10. EDIFACT: UNB S004 0019. |
INT_HEAD_TIME_EDIOUT |
6 |
Time |
Time on interchange-level envelopes. Loaded with an EDI-to-EDI map: Computer time. Loaded to an EDI-to-EDI map/loaded from on inbound: X12: ISA 10, EDIFACT: UNB S004 0019. |
INT_VERSION |
5 |
AN |
EDI version number. Loaded from on inbound: X12: ISA 12. EDIFACT: UNB S001 0001 and 0002. Loaded to on inbound: tradstat/VERS (first 5 characters). |
INT_VERSION_EDIOUT |
5 |
AN |
EDI version number. Loaded from on inbound: X12: ISA 12. EDIFACT: UNB S001 0001 and 0002. Loaded to on inbound: tradstat/VERS (first 5 characters). |
ISA_TYPE |
5 |
AN |
EDI Standard used in the map:
Loaded from on outbound and inbound: tradstat/ISA_TYPE. |
ISA_TYPE_EDIOUT |
5 |
AN |
EDI Standard used in the map:
Loaded from on outbound and an inbound: tradstat/ISA_TYPE. |
LOG_BYTES |
5 |
UI |
Size of the message/transaction. Loaded from log file on inbound and outbound. Available for interrogation by users. |
LOG_BYTES_EDIOUT |
5 |
UI |
Size of the message/transaction. Loaded from log file on inbound and outbound. Available for interrogation by users. |
LOG_ELEMENT |
2 |
UI |
EDI element name. Loaded from log file on inbound and outbound. Available for interrogation by users. |
LOG_ELEMENT_EDIOUT |
2 |
UI |
EDI element name. Loaded from log file on inbound and outbound. Available for interrogation by users |
LOG_ERRS |
5 |
UI |
Number of errors in the message/transaction. Loaded from log file on inbound and outbound. Available for interrogation by users. |
LOG_ERRS_EDIOUT |
5 |
UI |
Number of errors in the message/transaction. Loaded from log file on inbound and outbound. Available for interrogation by users. |
LOG_FIELDNAME |
15 |
AN |
Field name. Loaded from log file on inbound and outbound. Available for interrogation by users. |
LOG_FIELDNAME_EDIOUT |
15 |
AN |
Field name. Loaded from log file on inbound and outbound. Available for interrogation by users. |
LOG_LEVEL |
5 |
UI |
Flow level number. Loaded from log file on inbound and outbound. Available for interrogation by users. |
LOG_LEVEL_EDIOUT |
5 |
UI |
Flow level number. Loaded from log file on inbound and outbound. Available for interrogation by users. |
LOG_MSG_NO |
5 |
UI |
Error message number. Loaded from log file on inbound and outbound. Available for interrogation by users. |
LOG_MSG_TXT |
45 |
AN |
Text of the error message. Loaded from log file on inbound and outbound. Available for interrogation by users. |
LOG_READ_CNT |
9 |
UI |
Number of records read. Loaded from log file on inbound and outbound. Available for interrogation by users. Inbound: Number of EDI file records read. Outbound: Number of records read for record type. |
LOG_READ_CNT_EDIOUT |
9 |
UI |
Number of records read. Loaded from log file on inbound and EDI-to-EDI outbound. Available for interrogation by users. Inbound: Number of EDI file records read. EDI-to-EDI map: Number of records read for record type. |
LOG_RECNAME |
10 |
AN |
Record field name. Loaded from log file on inbound and outbound. Available for interrogation by users. |
LOG_RECNAME_EDIOUT |
10 |
AN |
Record field name. Loaded from log file on inbound and outbound. Available for interrogation by users. |
LOG_RPT_NO |
2 |
UI |
Log repeat number. |
LOG_RPT_NO_EDIOUT |
2 |
UI |
Log repeat number. |
LOG_SEGMENT |
3 |
AN |
EDI segment name. Loaded from log file on inbound and outbound. Available for interrogation by users. |
LOG_SEGMENT_EDIOUT |
3 |
AN |
EDI segment name. Loaded from log file on inbound and outbound. Available for interrogation by users. |
LOG_STATUS |
1 |
AN |
Log status code. Loaded from log file on inbound and outbound. Available for interrogation by users. |
LOG_STATUS_EDIOUT |
1 |
AN |
Log status code. Loaded from log file on inbound and outbound. Available for interrogation by users. |
LOG_SUBELEMENT |
2 |
UI |
EDI sub-element number. Loaded from log file on inbound and outbound. Available for interrogation by users. |
LOG_SUBELEMENT_EDIOUT |
2 |
UI |
EDI sub-element number. Loaded from log file on inbound and outbound. Available for interrogation by users. |
LOG_VALUE |
30 |
AN |
Value of record/field or EDI element when an error occurred. Loaded from log file on inbound and outbound. Available for interrogation by users. |
LOG_VALUE_EDIOUT |
30 |
AN |
Value of record/field or EDI element when an error occurred. Loaded from log file on inbound and outbound. Available for interrogation by users. |
MSG_IMPID |
14 |
AN |
Message Implementation Guide Identification. EDIFACT: UNH S017 0121. |
MSG_IMPID_EDIOUT |
14 |
AN |
Message Implementation Guide Identification. EDIFACT: UNH S017 0121. |
MSG_IMPREL |
3 |
AN |
Message Implementation Guide Release Number. EDIFACT: UNH S017 0124. |
MSG_IMPREL_EDIOUT |
3 |
AN |
Message Implementation Guide Release Number. EDIFACT: UNH S017 0124. |
MSG_IMPVER |
3 |
AN |
Message Implementation Guide Version Number. EDIFACT: UNH S017 0122. |
MSG_IMPVER_EDIOUT |
3 |
AN |
Message Implementation Guide Version Number. EDIFACT: UNH S017 0122. |
MSG_SUBID |
14 |
AN |
Message Subset Identification. EDIFACT: UNH S016 0115. |
MSG_SUBID_EDIOUT |
14 |
AN |
Message Subset Identification. EDIFACT: UNH S016 0115. |
MSG_SUBREL |
3 |
AN |
Message Subset Release Number. EDIFACT: UNH S016 0118. |
MSG_SUBREL_EDIOUT |
3 |
AN |
Message Subset Release Number. EDIFACT: UNH S016 0118. |
MSG_SUBVER |
3 |
AN |
Message Subset Version Number. EDIFACT: UNH S016 0116. |
MSG_SUBVER_EDIOUT |
3 |
AN |
Message Subset Version Number. EDIFACT: UNH S016 0116. |
MSG_TYPE |
6 |
AN |
Message Type Subfunction. EDIFACT: UNH S009 0113. |
MSG_TYPE_EDIOUT |
6 |
AN |
Message Type Subfunction. EDIFACT: UNH S009 0113. |
NCPDP_BATCH_MSG |
35 |
AN |
Batch trailer message. |
NCPDP_BATCH_MSG_EDIOUT |
35 |
AN |
Batch trailer message. |
NEW_COMPANY_ID |
35 |
AN |
Set to create a new ISA. |
NEXT_XML_TAG |
40 |
AN |
Value of the XML start tag following the last successfully read XML start tag. Captured by the program. Since users must build all XML read statements manually, this value allows users to know how to process the current start tag. (In other words, it allows users to know whether the following tag continues down the XPath, stays at the same place on the XPath, or goes back up the XPath.) |
NEXT_XML_TAG_EDIOUT |
40 |
AN |
Value of the XML start tag following the last successfully read XML start tag. Captured by the program. Since users must build all XML read statements manually, this value allows users to know how to process the current start tag. (In other words, it allows users to know whether the following tag continues down the XPath, stays at the same place on the XPath, or goes back up the XPath.) |
OUTPUT_FILENAME |
60 |
AN |
File name opened for Write. Captured by the program. Inbound: Map or Runtime override. |
OUTPUT_FILENAME_EDIOUT |
60 |
AN |
File name opened for Write. Captured by the program. Inbound: Map or Runtime override. |
PROC_NUMB |
10 |
AN |
Processing control number. |
PROC_NUMB_EDIOUT |
10 |
AN |
Processing control number. |
PROC_PRIO_CODE |
1 |
AN |
Processing priority code. Loaded to on outbound/loaded from on inbound: EDIFACT: UNB S005 0029. |
PROC_PRIO_CODE_EDIOUT |
1 |
AN |
Processing priority code. Loaded to an EDI-to-EDI map/loaded from on inbound: EDIFACT: UNB S005 0029. |
PROPRIETARY_LENGTH |
3 |
AN |
Length of proprietary header. |
PROPRIETARY_LENGTH_EDIOUT |
3 |
AN |
Length of proprietary header. |
PROPRIETARY_TEXT |
250 |
AN |
Proprietary header information. |
PROPRIETARY_TEXT_EDIOUT |
250 |
AN |
Proprietary header information. |
RECV_CODE |
35 |
AN |
Interchange/Outer Envelope Receiver ID code. Loaded from on outbound: tp/IDCODE (if blank, use tradstat/RCV_IDCODE). Loaded to on outbound/loaded from on inbound: X12: ISA 08. EDIFACT: UNB S003 0010. |
RECV_CODE_EDIOUT |
35 |
AN |
Interchange/Outer Envelope Receiver ID code. Loaded from an EDI-to-EDI map: tp/IDCODE (if blank, use tradstat/RCV_IDCODE). Loaded to an EDI-to-EDI map/loaded from on inbound: X12: ISA 08. EDIFACT: UNB S003 0010. |
RECV_QUAL |
4 |
AN |
Interchange/Outer Envelope Receiver ID code qualifier. Loaded from on outbound: tp/IDQUAL (if blank, use tradstat/RCV_IDQUAL) (Also if blank, use “00” for X12 and null for EDIFACT.) Loaded to on outbound/loaded from on inbound: X12: ISA 07 (max length 4). EDIFACT: UNB S003 0007. |
RECV_QUAL_EDIOUT |
4 |
AN |
Interchange/Outer Envelope Receiver ID code qualifier Loaded from an EDI-to-EDI map: tp/IDQUAL (if blank, use tradstat/RCV_IDQUAL). (Also if blank, use “00” for X12 and null for EDIFACT.) Loaded to an EDI-to-EDI map/loaded from on inbound: X12: ISA 07 (max length 4). EDIFACT: UNB S003 0007. |
RECV_ROUTE |
14 |
AN |
Interchange/Outer Envelope Receiver Routing Code. Loaded to on outbound/loaded from on inbound: EDIFACT: UNB S003 0014. |
RECV_ROUTE_EDIOUT |
14 |
AN |
Interchange/Outer Envelope Receiver Routing Code. Loaded to an EDI-to-EDI map/loaded from on inbound: EDIFACT: UNB S003 0014. |
RECVR_SUBID |
35 |
AN |
Interchange Receiver Internal Sub-Identification. EDIFACT: UNB S003 0046. |
RECVR_SUBID_EDIOUT |
35 |
AN |
Interchange Receiver Internal Sub-Identification. EDIFACT: UNB S003 0046. |
RESP_AGENCY_CODE |
1 |
AN |
Responsible agency code. User-assigned value for outbound use (if blank, the system loads “X”). Loaded to on outbound/loaded from on inbound: X12: GS 07. |
RESP_AGENCY_CODE_EDIOUT |
1 |
AN |
Responsible agency code. User-assigned value for EDI-to-EDI map use (if blank, the system loads “X”). Loaded to an EDI-to-EDI map/loaded from on inbound: X12: GS 07. |
SCEN_ID |
14 |
AN |
Scenario Identification. EDIFACT: UNH S018 0127. |
SCEN_ID_EDIOUT |
14 |
AN |
Scenario Identification. EDIFACT: UNH S018 0127. |
SCEN_REL |
3 |
AN |
Scenario Release Number. EDIFACT: UNH S018 0130. |
SCEN_REL_EDIOUT |
3 |
AN |
Scenario Release Number. EDIFACT: UNH S018 0130. |
SCEN_VER |
3 |
AN |
Scenario Version Number. EDIFACT: UNH S018 0128. |
SCEN_VER_EDIOUT |
3 |
AN |
Scenario Version Number. EDIFACT: UNH S018 0128. |
SECU_CODE |
14 |
AN |
Trading partner security ID code. Loaded from on outbound: tp/SECU_CODE. Loaded to on outbound/loaded from on inbound: X12: ISA 04. EDIFACT: UNB S005 0022. |
SECU_CODE_EDIOUT |
14 |
AN |
Trading partner security ID code. Loaded from an EDI-to-EDIEDI-to-EDI map: tp/SECU_CODE. Loaded to an EDI-to-EDI map/loaded from on inbound: X12: ISA 04. EDIFACT: UNB S005 0022. |
SECU_QUAL |
2 |
AN |
Trading partner security ID code qualifier. Loaded from on outbound: tp/SECU_QUAL (if blank, use “00” for X12 and null for EDIFACT). Loaded to on outbound/loaded from on inbound: X12: ISA 03. EDIFACT: UNB S005 0025. |
SECU_QUAL_EDIOUT |
2 |
AN |
Trading partner security ID code qualifier. Loaded from an EDI-to-EDI map: tp/SECU_QUAL (if blank, use “00” for X12 and null for EDIFACT). Loaded to an EDI-to-EDI map/loaded from on inbound: X12: ISA 03. EDIFACT: UNB S005 0025. |
SEG_TERM |
1 |
AN |
X12 segment delimiter. Loaded from on outbound: tp/SEG_DELMT (if blank, use X12 default segment terminator). Loaded to on outbound/loaded from on inbound: X12: ISA 16. |
SEG_TERM_EDIOUT |
1 |
AN |
X12 segment delimiter. Loaded from an EDI-to-EDI map: tp/SEG_DELMT (if blank, use X12 default segment terminator). Loaded to an EDI-to-EDI map/loaded from on inbound: X12: ISA 16. |
SEGMENT_COUNT |
9 |
UI |
Number of segments in a transaction. Loaded from on outbound: tradstat/GS_NO. Loaded to on outbound/loaded from on inbound:
|
SEGMENT_COUNT_EDIOUT |
9 |
UI |
Number of segments in a transaction. Loaded from an EDI-to-EDI map: tradstat/GS_NO. Loaded to an EDI-to-EDI map/loaded from on inbound:
|
SEND_CODE |
35 |
AN |
Sender ID code on interchange-level envelopes. Loaded from on outbound: tp/SND_IDCODE (if blank, use wixset/WIX_IDCODE). Loaded to on outbound/loaded from on inbound: X12: ISA 06. EDIFACT: UNB S002 0004. |
SEND_CODE_EDIOUT |
35 |
AN |
Sender ID code on interchange-level envelopes. Loaded from an EDI-to-EDI map: tp/SND_IDCODE (if blank, use wixset/WIX_IDCODE). Loaded to an EDI-to-EDI map/loaded from on inbound: X12: ISA 06. EDIFACT: UNB S002 0004. |
SEND_QUAL |
4 |
AN |
Sender ID code qualifier on interchange-level envelopes. Loaded from on outbound: tp/SND_IDQUAL (if blank, use wixset/WIX_IDQUAL). Loaded to on outbound/loaded from on inbound: X12: ISA 05. EDIFACT: UNB S002 0007. |
SEND_QUAL_EDIOUT |
4 |
AN |
Sender ID code qualifier on interchange-level envelopes. Loaded from an EDI-to-EDI map: tp/SND_IDQUAL (if blank, use wixset/WIX_IDQUAL). Loaded to an EDI-to-EDI map/loaded from on inbound: X12: ISA 05. EDIFACT: UNB S002 0007. |
SEND_REV_ROUTE |
14 |
AN |
Sender reverse routing code. Loaded to on outbound/loaded from on inbound: EDIFACT: UNB S002 0008. |
SEND_REV_ROUTE_EDIOUT |
14 |
AN |
Sender reverse routing code. Loaded to an EDI-to-EDI map/loaded from on inbound: EDIFACT: UNB S002 0008. |
SEQ_TRAN |
1 |
AN |
Sequence of transfers. Loaded to on outbound/loaded from on inbound: EDIFACT: UNH S010 0070. |
SEQ_TRAN_EDIOUT |
1 |
AN |
Sequence of transfers. Loaded to an EDI-to-EDI map/loaded from on inbound: EDIFACT: UNH S010 0070. |
SERV_CODE |
6 |
AN |
Service Code List Directory Version Number. EDIFACT: UNB S001 0080. |
SERV_CODE_EDIOUT |
6 |
AN |
Service Code List Directory Version Number. EDIFACT: UNB S001 0080. |
SERV_ID |
15 |
AN |
Service provider ID. |
SERV_ID_EDIOUT |
15 |
AN |
Service provider ID. |
SERV_QUAL |
2 |
AN |
Service provider ID qualifier. |
SERV_QUAL_EDIOUT |
2 |
AN |
Service provider ID qualifier. |
SKIP_SEGMENT_WRITE |
1 |
AN |
Flag that specifies to not write this EDI segment. Generated by the program on outbound and inbound:
|
SKIP_SEGMENT_WRITE_EDIOUT |
1 |
AN |
Flag that specifies to not write this EDI segment. Generated by the program on outbound and inbound:
|
SNDR_SUBID |
35 |
AN |
Interchange Sender Internal Sub-Identification. EDIFACT: UNB S002 0042. |
SNDR_SUBID_EDIOUT |
35 |
AN |
Interchange Sender Internal Sub-Identification. EDIFACT: UNB S002 0042. |
SOFT_ID |
10 |
AN |
Software/vendor ID. |
SOFT_ID_EDIOUT |
10 |
AN |
Software/vendor ID. |
SQL_RETURN |
2 |
UI |
SQL return code. Returns the status of SQL commands. Generated by the program and used to determine if the last FETCH command returned a result set. For example, you can use the SQL_RETURN system variable in an IF/THEN/ELSE command to determine if a result set has been returned. |
SQL_RETURN_EDIOUT |
2 |
UI |
SQL return code. Returns the status of SQL commands. Generated by the program and used to determine if the last FETCH command returned a result set. For example, you can use the SQL_RETURN system variable in an IF/THEN/ELSE command to determine if a result set has been returned. |
SUB_SEPERATOR |
1 |
AN |
Sub-element delimiter for X12 and HL7 data. Loaded to on outbound/loaded from on inbound: X12: ISA Column 105. Loaded from outbound: tp/ELE_DELIMT (if blank, use standard default). |
SUB_SEPERATOR_EDIOUT |
1 |
AN |
Sub-element delimiter for X12 and HL7 data. Loaded to an EDI-to-EDI map/loaded from on inbound: X12: ISA Column 105. Loaded from an EDI-to-EDI map: tp/ELE_DELIMT (if blank, use standard default). |
SYS_ADDR1 |
35 |
AN |
First line of trading partner street address. Loaded to on inbound: tp/ADDR1. |
SYS_ADDR1_EDIOUT |
35 |
AN |
First line of trading partner street address. Loaded to on inbound: tp/ADDR1. Obtained from the outbound transactions trading partner entry. |
SYS_ADDR2 |
35 |
AN |
Second line of trading partner street. Loaded to on inbound: tp/ADDR2. |
SYS_ADDR2_EDIOUT |
35 |
AN |
Second line of trading partner street. Loaded to on inbound: tp/ADDR2. Obtained from the outbound transactions trading partner entry. |
SYS_BILLIDEN |
15 |
AN |
Trading partner Bill To ID code. Loaded to on inbound: tp/BILLIDEN. |
SYS_BILLIDEN_EDIOUT |
15 |
AN |
Trading partner Bill To ID code. Loaded to on inbound: tp/BILLIDEN. Obtained from the outbound transactions trading partner entry. |
SYS_BILLQUAL |
2 |
AN |
Trading partner Bill To ID code qualifier. Loaded to on inbound: tp/BILLQUAL. |
SYS_BILLQUAL_EDIOUT |
2 |
AN |
Trading partner Bill To ID code qualifier. Loaded to on inbound: tp/BILLQUAL. Obtained from the outbound transactions trading partner entry. |
SYS_CHG_TRANS |
6 |
AN |
Indicator that transaction has changed. Generated by the program. On outbound, this triggers a trading partner lookup. (In other words, it is used by the program in conjunction with SYS_TRANS to change maps for different transactions when multiple transactions are in one file.) Each time the program writes a message/transaction, if SYS_CHG_TRANS is different from SYS_TRANS, the program, writes a new:
|
SYS_CITY |
30 |
AN |
City where the trading partner is located. Loaded to on inbound: tp/CITY. |
SYS_CITY_EDIOUT |
30 |
AN |
City where the trading partner is located. Loaded to on inbound: tp/CITY. Obtained from the outbound transactions trading partner entry. |
SYS_COUNTRY |
25 |
AN |
Country where the trading partner is located. Loaded to on inbound: tp/COUNTRY. |
SYS_COUNTRY_EDIOUT |
25 |
AN |
Country where the trading partner is located. Loaded to on inbound: tp/COUNTRY. Obtained from the outbound transactions trading partner entry. |
SYS_DATE |
8 |
Date |
Runtime system date. Loaded with on inbound and outbound: Computer date. |
SYS_DATE_EDIOUT |
8 |
Date |
Runtime system date. Loaded with on inbound and outbound: Computer date. Obtained from the outbound transactions trading partner entry. |
SYS_GENGS |
1 |
AN |
Flag to generate multiple group envelopes. Generated by the program on Outbound to: Generate multiple group envelopes. |
SYS_HHMMSS |
6 |
Time |
System time in format HHMMSS. Loaded with on inbound and outbound: Computer time. |
SYS_HHMMSS_EDIOUT |
6 |
Time |
System time in format HHMMSS. Loaded with on inbound and outbound: Computer time. Obtained from the outbound transactions trading partner entry. |
SYS_IDCODE |
35 |
AN |
Trading partner ID code. Not currently used. |
SYS_IDCODE_EDIOUT |
35 |
AN |
Trading partner ID code. Not currently used. Obtained from the outbound transactions trading partner entry. |
SYS_IDQUAL |
2 |
AN |
Trading partner ID code qualifier. Not currently used. |
SYS_IDQUAL_EDIOUT |
2 |
AN |
Trading partner ID code qualifier. Not currently used. Obtained from the outbound transactions trading partner entry. |
SYS_MAP_EXT |
8 |
AN |
Map name extension. User-defined at trade agreement creation to distinguish multiple map definitions for the same transaction, direction, and trade partner. |
SYS_MAP_EXT_EDIOUT |
8 |
AN |
Map name extension. User-defined at trade agreement creation to distinguish multiple map definitions for the same transaction, direction, and trade partner. |
SYS_MAP_EXT_CHG |
8 |
AN |
Used to change the map name extension of the current map (outbound only). |
SYS_NAME |
35 |
AN |
Internal name for the trading partner. Loaded to on inbound: tp/NAME. |
SYS_NAME_EDIOUT |
35 |
AN |
Internal name for the trading partner. Loaded to on inbound: tp/NAME. Obtained from the outbound transactions trading partner entry. |
SYS_RUN_ID |
9 |
UI |
Log run ID number. For inbound and outbound, this value can be:
This number is used to create output file names for routed data. |
SYS_SHIPIDEN |
15 |
AN |
Trading partner ship-to identification code. Loaded to on inbound: tp/SHIPIDEN. |
SYS_SHIPIDEN_EDIOUT |
15 |
AN |
Trading partner ship-to identification code. Loaded to on inbound: tp/SHIPIDEN. Obtained from the outbound transactions trading partner entry. |
SYS_SHIPQUAL |
2 |
AN |
Trading partner ship-to identification code qualifier. Loaded to on inbound: tp/SHIPQUAL. |
SYS_SHIPQUAL_EDIOUT |
2 |
AN |
Trading partner Ship To identification code qualifier. Loaded to on inbound: tp/SHIPQUAL. Obtained from the outbound transactions trading partner entry. |
SYS_STATE |
2 |
AN |
State where the trading partner is located. Loaded to on inbound: tp/STATE. |
SYS_STATE_EDIOUT |
2 |
AN |
State where the trading partner is located. Loaded to on inbound: tp/STATE. Obtained from the outbound transactions trading partner entry. |
SYS_TIME |
4 |
Time |
System Time in format HHMM. Loaded with: Computer time. |
SYS_TIME_EDIOUT |
4 |
Time |
System Time in format HHMM. Loaded with: Computer time. |
SYS_TRADNO |
35 |
AN |
Internal ID number for trading partner generated by the trading partner lookup. Loaded from on inbound and outbound: tp/CUSTNO. Trading partner lookup on inbound: Using the trading partner search option criteria specified by the user, the program compares selected fields in the EDI envelopes with the appropriate fields in the trading partner database, to find the CUSTNO. Trading partner lookup on outbound: The program matches the trading partner ID field in the user file with the group receiver code in the trading partner database, to find the CUSTNO. Both lookups are affected by the presence or absence of override values and switches. |
SYS_TRADNO_EDIOUT |
35 |
AN |
Internal ID number for trading partner generated by the trading partner lookup. Loaded from on inbound and on an EDI-to-EDI map: tp/CUSTNO. Trading partner lookup on inbound: Using the trading partner search option criteria specified by the user, the program compares selected fields in the EDI envelopes with the appropriate fields in the trading partner database, to find the CUSTNO. Trading partner lookup on EDI-to-EDI map: The program matches the trading partner ID field in the user file with the group receiver code in the trading partner database, to find the CUSTNO. Both lookups are affected by the presence or absence of override values and switches. |
SYS_TRANS |
6 |
AN |
Message/transaction set. Passed in on outbound as required parameter 4: -t message/ transaction set. Loaded to on outbound/loaded from on inbound: X12: ST 01. EDIFACT: UNH S009 0065. Loaded to on inbound and outbound: tradstat/MAP_TRAN. Changing this value does not affect the envelope or the actual transaction name used. |
SYS_TRANS_EDIOUT |
6 |
AN |
Message/transaction set Passed in on EDI-to-EDI outbound as required parameter 4: -t message/ transaction set. Loaded to an EDI-to-EDI map/loaded from on inbound: X12: ST 01. EDIFACT: UNH S009 0065. Loaded to on inbound and on an EDI-to-EDI map: tradstat/MAP_TRAN. Changing this value does not affect the envelope or the actual transaction name used. |
SYS_TRCODE |
2 |
AN |
Transaction code. Passed in on outbound as required parameter 3: two-character transaction code |
SYS_TRCODE_EDIOUT |
2 |
AN |
Transaction code. Passed in an EDI-to-EDI map as required parameter 3: two-character transaction code. |
SYS_USER_FIELD |
35 |
AN |
USER DEFINED FIELD. |
SYS_USER_FIELD_EDIOUT |
35 |
AN |
USER DEFINED FIELD. |
SYS_ZIP |
9 |
AN |
Postal code of trading partner location. Loaded to on inbound: tp/ZIP. |
SYS_ZIP_EDIOUT |
9 |
AN |
Postal code of trading partner location. Loaded to on inbound: tp/ZIP. Obtained from the outbound transaction trading partner entry. |
TELEPHONE1 |
22 |
AN |
Trading partner telephone number #1. Loaded to on inbound: tp/TELEPHONE1. |
TELEPHONE1_EDIOUT |
22 |
AN |
Trading partner telephone number #1. Loaded to on inbound: tp/TELEPHONE1. Obtained from the outbound transaction trading partner entry. |
TELEPHONE2 |
22 |
AN |
Trading partner telephone number #2. Loaded to on inbound: tp/TELEPHONE2. |
TELEPHONE2_EDIOUT |
22 |
AN |
Trading partner telephone number #2. Loaded to on inbound: tp/TELEPHONE2. Obtained from the outbound transaction trading partner entry. |
TEST_IND |
1 |
AN |
Transaction mode (T, P, or I). Loaded from on outbound: tradstat/STAT. Loaded to on outbound/loaded from on inbound: X12: ISA 15. EDIFACT: UN B S005 0035. |
TEST_IND_EDIOUT |
1 |
AN |
Transaction mode (T, P, or I). Loaded from an EDI-to-EDI map: tradstat/STAT. Loaded to an EDI-to-EDIEDI-to-EDI map/loaded from on inbound: X12: ISA 15. EDIFACT: UN B S005 0035. |
TOT_ERRS |
9 |
UI |
Total number of errors during a map run. Loaded from log file on inbound and outbound. Available for interrogation by users. |
TOT_ERRS_EDIOUT |
9 |
UI |
Total number of errors during a map run. Loaded from log file on inbound and on an EDI-to-EDI map. Available for interrogation by users. |
TRANS_ACK_REQ |
1 |
AN |
Specifies that a Functional Acknowledgement is expected from the receiver of an outbound map or has been requested by the sender of an inbound map: 1 = Expected/requested. 0 = Not expected/requested. Loaded from on inbound and outbound: tradstat/ARK_RQSTD2. On outbound maps: When the value of TRANS_ACK_REQ is 1, the program saves additional information to the log. This information is used to match the Functional Acknowledgement that is sent back with the data that requested it and confirm that it was received within the time period specified. On inbound maps: When the value of TRANS_ACK_REQ is 1, the program “turns on” trlog/TR_ACK_TYPE and saves additional information to the log. This information is used as input to the map that creates the Functional Acknowledgement. On outbound Functional Acknowledgements: When an EDI transaction is received which the trading partners have agreed should generate a Functional Acknowledgement, the receiver must run one of the acknowledgement maps provided with the software. As input to the map, the program uses all of the data in trlog with TR_ACK_TYPE “turned on”. After creating the acknowledgements, the program “turns off” TR_ACK_TYPE to prevent sending duplicate acknowledgements. On inbound Functional Acknowledgements: When an Interchange Acknowledgement is received, the program compares it with the information entered in the log to match the acknowledgement with the correct requesting data it and to confirm that it was received within the time period specified. The program must “turn off” trlog/ACK_EXPECT after acknowledgements have been received to indicate that the request for an acknowledgement has been fulfilled. |
TRANS_ACK_REQ_EDIOUT |
1 |
AN |
Specifies that a Functional Acknowledgement is expected from the receiver of an EDI-to-EDI outbound map or has been requested by the sender of an inbound map: 1 = Expected/requested. 0 = Not expected/requested. Loaded from on inbound and EDI-to-EDI map: tradstat/ARK_RQSTD2. On EDI-to-EDI maps: When the value of TRANS_ACK_REQ is 1, the program saves additional information to the log. This information is used to match the Functional Acknowledgement that is sent back with the data that requested it and confirm that it was received within the time period specified. On inbound maps: When the value of TRANS_ACK_REQ is 1, the program “turns on” trlog/TR_ACK_TYPE and saves additional information to the log. This information is used as input to the map that creates the Functional Acknowledgement. On EDI-to-EDI outbound Functional Acknowledgements: When an EDI transaction is received which the trading partners have agreed should generate a Functional Acknowledgement, the receiver must run one of the acknowledgement maps provided with the software. As input to the map, the program uses all of the data in trlog with TR_ACK_TYPE “turned on”. After creating the acknowledgements, the program “turns off” TR_ACK_TYPE to prevent sending duplicate acknowledgements. On inbound Functional Acknowledgements: When an Interchange Acknowledgement is received, the program compares it with the information entered in the log to match the acknowledgement with the correct requesting data it and to confirm that it was received within the time period specified. The program must “turn off” trlog/ACK_EXPECT after acknowledgements have been received to indicate that the request for an acknowledgement has been fulfilled. |
TRANS_CTRL_NUM |
35 |
AN |
Transaction control number. Loaded from on outbound: (tradstat/GS_NO X 1000) + # of transactions. Loaded to on outbound/loaded from on inbound: X12 ST/SE 02. EDIFACT: UNH/UNT 0062. |
TRANS_CTRL_NUM_EDIOUT |
35 |
AN |
Transaction control number. Loaded from an EDI-to-EDI map: (tradstat/GS_NO X 1000) + # of transactions. Loaded to an EDI-to-EDI map/loaded from on inbound: X12 ST/SE 02. EDIFACT: UNH/UNT 0062. |
TRANSMISSION_TYPE |
2 |
AN |
Batch header transmission type. |
TRANSMISSION_TYPE_EDIOUT |
2 |
AN |
Batch header transmission type. |
USER_BHS0201_SCODE |
15 |
AN |
Batch sending application. |
USER_BHS0301_R_ROUTE |
15 |
AN |
Batch sending facility. |
USER_BHS0401_RCODE |
15 |
AN |
Batch receiving application. |
USER_BHS0501_RCVCODE |
15 |
AN |
Batch receiving facility. |
USER_BHS0601_DATE |
8 |
AN |
Batch creation date. |
USER_BHS0602_TIME |
4 |
AN |
Batch creation time. |
USER_BHS0701_PASSWORD |
12 |
AN |
Batch security. |
USER_BHS1001_GS_CCTRL |
14 |
AN |
Batch control ID. |
USER_FHS0201_SCODE |
15 |
AN |
File sending application. |
USER_FHS0301_R_ROUTE |
15 |
AN |
File sending facility. |
USER_FHS0401_RCODE |
15 |
AN |
File receiving application. |
USER_FHS0501_RCVCODE |
15 |
AN |
File receiving facility. |
USER_FHS0601_DATE |
8 |
AN |
File creation date. |
USER_FHS0602_TIME |
4 |
AN |
File creation time. |
USER_FHS0701_PASSWORD |
12 |
AN |
File security. |
USER_FHS0801_FNAME |
20 |
AN |
File name/ID. |
USER_FHS1001_GISABUF |
35 |
AN |
File control ID. |
USER_GS01_SYS_TRCODE |
2 |
AN |
Functional identifier code. |
USER_GS02_SCODE |
15 |
AN |
Application sender’s code. |
USER_GS03_RCODE |
15 |
AN |
Application receiver’s code. |
USER_GS04_SYS_DATE |
8 |
AN |
Date. |
USER_GS05_SYS_TIME |
8 |
AN |
Time. |
USER_GS06_FUNC_GP_NUM |
9 |
AN |
Group control number. |
USER_GS07_CH_AGENCY |
2 |
AN |
Responsible agency code. |
USER_GS08_XVER |
12 |
AN |
Version/release/industry identifier code. |
USER_ISA01_AUTH_QUAL |
2 |
AN |
Authorization information qualifier. |
USER_ISA02_AUTH_CODE |
15 |
AN |
Authorization information. |
USER_ISA03_SECU_QUAL |
2 |
AN |
Security information qualifier. |
USER_ISA04_SECU_CODE |
14 |
AN |
Security information. |
USER_ISA05_SEND_QUAL |
4 |
AN |
Interchange ID qualifier. |
USER_ISA06_SEND_CODE |
35 |
AN |
Interchange sender ID. |
USER_ISA07_RECV_QUAL |
4 |
AN |
Interchange ID qualifier. |
USER_ISA08_RECV_CODE |
35 |
AN |
Interchange receiver ID. |
USER_ISA09_DATE |
6 |
AN |
Interchange date. |
USER_ISA10_TIME |
4 |
AN |
Interchange time. |
USER_ISA11_PTSTD |
1 |
AN |
Interchange control standards identifier. |
USER_ISA12_ISA_TYPE |
5 |
AN |
Interchange control version number. |
USER_ISA13_GISABUF |
9 |
AN |
Interchange control number. |
USER_ISA14_ACK_REQSTD |
1 |
AN |
Acknowledgement requested. |
USER_ISA15_TEST_IND |
1 |
AN |
Usage indicator. |
USER_ISA16_SUB_SEP |
1 |
AN |
Component element separator. |
USER_OUT_FILENAME |
160 |
AN |
User-generated override for the EDI output file name. On inbound: The file to which EDI data that is passed through is written and which is generated by the program using the run ID number. On outbound: The file to which the mapped EDI data is written. |
USER_OUT_FILENAME_EDIOUT |
160 |
AN |
User-generated override for the EDI output file name. On inbound: The file to which EDI data that is passed through is written and which is generated by the program using the run ID number. On an EDI-to-EDI map: The file to which the mapped EDI data is written. |
USER_UNB0101_VERS |
4 |
AN |
Syntax identifier. |
USER_UNB0102_VERS |
1 |
AN |
Syntax version number. |
USER_UNB0103_SERV_CODE |
6 |
AN |
Syntax version. |
USER_UNB0201_SCODE |
35 |
AN |
Sender identification. |
USER_UNB0202_PSQUAL |
4 |
AN |
Partner identification code qualifier. |
USER_UNB0203_SNDR_ROUTE |
35 |
AN |
Sender routing address. |
USER_UNB0204_SNDR_SUBID |
35 |
AN |
Sender subID. |
USER_UNB0301_RCODE |
35 |
AN |
Recipient identification. |
USER_UNB0302_PRECV |
4 |
AN |
Partner identification code qualifier. |
USER_UNB0303_RCVR_ROUTE |
35 |
AN |
Recipient routing address. |
USER_UNB0304_RCVR_SUBID |
35 |
AN |
Recipient subID. |
USER_UNB0401_DATE |
8 |
AN |
Date of preparation. |
USER_UNB0402_TIME |
4 |
AN |
Time of preparation. |
USER_UNB0501_GISABUF |
35 |
AN |
Interchange control reference. |
USER_UNB0601_PASSWORD |
14 |
AN |
Recipient reference/password. |
USER_UNB0602_PSECU |
2 |
AN |
Recipient reference/password. |
USER_UNB0701_COMREF |
14 |
AN |
Application reference. |
USER_UNB0801_PCODE |
1 |
AN |
Processing priority code. |
USER_UNB0901_ACK_MSG |
1 |
AN |
Acknowledgement request. |
USER_UNB1001_COMAG |
35 |
AN |
Communications agreement ID. |
USER_UNB1101_PTIND |
1 |
AN |
Test indicator. |
USER_UNG0101_F_IDCODE |
6 |
AN |
Functional group identification. |
USER_UNG0201_SCODE |
35 |
AN |
Application sender identification. |
USER_UNG0202_APSQUAL |
4 |
AN |
Partner identification code qualifier. |
USER_UNG0301_RCODE |
35 |
AN |
Application recipient’s identification. |
USER_UNG0302_APRQUAL |
4 |
AN |
Partner identification code. |
USER_UNG0401_DATE |
8 |
AN |
Date of preparation. |
USER_UNG0402_TIME |
4 |
AN |
Time of preparation. |
USER_UNG0501_GUNGBUF |
14 |
AN |
Functional group reference number. |
USER_UNG0601_CNT_AG1 |
3 |
AN |
Controlling agency. |
USER_UNG0701_XVER |
3 |
AN |
Message type version number. |
USER_UNG0702_XVER2 |
3 |
AN |
Message type release number. |
USER_UNG0703_ASSOC_CODE |
6 |
AN |
Association assigned code. |
USER_UNG0801_AP_PASE |
14 |
AN |
Application password. |
WIX_ADP_AD_PASS |
8 |
AN |
Company ADP authorization password. |
WIX_ADP_AD_PASS_EDIOUT |
8 |
AN |
Company ADP authorization password. |
WIX_ADP_ID |
8 |
AN |
Company ADP user identification. |
WIX_ADP_ID_EDIOUT |
8 |
AN |
Company ADP user identification. |
WIX_ADP_PASS |
8 |
AN |
Company ADP password. |
WIX_ADP_PASS_EDIOUT |
8 |
AN |
Company ADP password. |
WIX_APP_SND_QL |
4 |
AN |
UNG0202. |
WIX_APP_SND_QL_EDIOUT |
4 |
AN |
UNG0202. |
WIX_AUTH_CODE |
10 |
AN |
Company authorization code. |
WIX_AUTH_CODE_EDIOUT |
10 |
AN |
Company authorization code. |
WIX_AUTH_QUAL |
2 |
AN |
Company authorization code qualifier. |
WIX_AUTH_QUAL_EDIOUT |
2 |
AN |
Company authorization code qualifier. |
WIX_B_SEND_ID |
24 |
AN |
Company batch sender ID. |
WIX_B_SEND_ID_EDIOUT |
24 |
AN |
Company batch sender ID. |
WIX_BIN_NUMB |
6 |
AN |
Company bin number. |
WIX_BIN_NUMB_EDIOUT |
6 |
AN |
Company bin number. |
WIX_COMPANY_NAME |
35 |
AN |
Company name. |
WIX_COMPANY_NAME_EDIOUT |
35 |
AN |
Company name. |
WIX_GSID |
35 |
AN |
Company group/inner envelope sender ID code. |
WIX_GSID_EDIOUT |
35 |
AN |
Company group/inner envelope sender ID code. |
WIX_IDCODE |
35 |
AN |
Company interchange/outer envelope sender ID code. |
WIX_IDCODE_EDIOUT |
35 |
AN |
Company interchange/outer envelope sender ID code. |
WIX_IDQUAL |
2 |
AN |
Company interchange/outer envelope sender ID code qualifier. |
WIX_IDQUAL_EDIOUT |
2 |
AN |
Company interchange/outer envelope sender ID code qualifier. |
WIX_MODEM_BAUD |
4 |
AN |
Company modem baud rate. |
WIX_MODEM_BAUD_EDIOUT |
4 |
AN |
Company modem baud rate. |
WIX_MODEM_PORT |
2 |
AN |
Company modem port. |
WIX_MODEM_PORT_EDIOUT |
2 |
AN |
Company modem port. |
WIX_PHONE_TONE |
1 |
AN |
Company modem tone. |
WIX_PHONE_TONE_EDIOUT |
1 |
AN |
Company modem tone. |
WIX_PROC_NUMB |
10 |
AN |
Company process control number. |
WIX_PROC_NUMB_EDIOUT |
10 |
AN |
Company process control number. |
WIX_PRODUCER_ID |
12 |
AN |
Company producer ID code. |
WIX_PRODUCER_ID_EDIOUT |
12 |
AN |
Company producer ID code. |
WIX_SECU_CODE |
10 |
AN |
Company security code. |
WIX_SECU_CODE_EDIOUT |
10 |
AN |
Company security code. |
WIX_SECU_QUAL |
2 |
AN |
Company security code qualifier. |
WIX_SECU_QUAL_EDIOUT |
2 |
AN |
Company security code qualifier. |
WIX_SERV_ID |
15 |
AN |
Company service ID. |
WIX_SERV_ID_EDIOUT |
15 |
AN |
Company service ID. |
WIX_SERV_QUAL |
2 |
AN |
Company service ID qualifier. |
WIX_SERV_QUAL_EDIOUT |
2 |
AN |
Company service ID qualifier. |
WIX_SNDR_ROUTE |
15 |
AN |
Sender internal ID. |
WIX_SNDR_ROUTE_EDIOUT |
15 |
AN |
Sender internal ID. |
WIX_SNDR_SUBID |
15 |
AN |
Sender internal subID. |
WIX_SNDR_SUBID_EDIOUT |
15 |
AN |
Sender internal subID. |
WIX_SOFT_ID |
10 |
AN |
Company software ID. |
WIX_SOFT_ID_EDIOUT |
10 |
AN |
Company software ID. |
WIX_TEL_NUMBR |
16 |
AN |
Company telephone number. |
WIX_TEL_NUMBR_EDIOUT |
16 |
AN |
Company telephone number. |
X12_VERSION |
12 |
AN |
Version of EDI standard used in the map. Loaded from on outbound: tradstat/VERS. Loaded to on outbound/loaded from on inbound: X12: GS 08. EDIFACT: UNG S008 0052. |
X12_VERSION_EDIOUT |
12 |
AN |
Version of EDI standard used in the map. Loaded from an EDI-to-EDI map: tradstat/VERS. Loaded to an EDI-to-EDI map/loaded from on inbound: X12: GS 08. EDIFACT: UNG S008 0052. |
