Number
|
Severity
|
Text and Explanation
|
1101
|
17
|
Unable to allocate new page for database `%.*s'. There are no more pages available on valid allocation pages. Space can be created by dropping objects, extending the database, or dumping the log with no_log.
Explanation: Command failed due to resource limitation. Modify the command
to fit available resources, retry when the resource is available,
or contact your System Administrator to address the resource problem.
(Not raised in Release 11.0 and higher.)
|
1102
|
22
|
Unable to locate allocation page %ld for database `%.*s'. This allocation page contains the extent that the target allocation page is in, but the allocation page is not in the translation table in the DBTABLE. Run DBCC CHECKTABLE on sysusages.
Explanation: A table or index may be corrupt. Report the error to your
System Administrator. Adaptive Server must be restarted and dbcc
diagnostics run.
|
1103
|
21
|
Allocation page %ld in database `%.*s' has different segment id than that of the object to which we are allocating. Run DBCC CHECKALLOC.
Explanation: Adaptive Server encountered an internal error affecting all
processes in the current database. Report the error to your System
Administrator. Adaptive Server must be restarted and dbcc diagnostics
run. (Not raised in Release 11.0 and higher.)
|
1104
|
20
|
Conflict between number of extents marked in log record in the allocation bitmap and the allocation count. Allocation count is %d. Bitmap is 0x%lx 0x%lx 0x%lx 0x%lx.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics (dbcc checkalloc)
can be run on the database.
|
1105
|
17
|
Can't allocate space for object `%.*s' in database `%.*s' because `%.*s' segment is full. If you ran out of space in syslogs, dump the transaction log. Otherwise, use ALTER DATABASE or sp_extendsegment to increase size of the segment.
Explanation: Refer to the writeup for this error.
|
1106
|
20
|
First pass through allocation page %ld found %d free extents. After logging, only found %d free extents.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics can be run. (Not
raised in Release 11.0 and higher.)
|
1108
|
21
|
Cannot deallocate extent %ld, database %d. Object id %ld, index id %d, status %d in extent does not match object id %ld, index id %d, status %d in object being deallocated. Run DBCC CHECKALLOC.
Explanation: Refer to the writeup for this error.
|
1109
|
21
|
Attempt to read allocation page %ld failed either because object ID is not correct (%ld) or the page ID is not correct (%ld).
Explanation: Adaptive Server encountered an internal error affecting all
processes in the current database. Report the error to your System
Administrator. Adaptive Server must be restarted and dbcc diagnostics
run. (Not raised in Release 11.0 and higher.)
|
1110
|
20
|
Attempt to resource lock allocation page %ld in database `%.*s' by process %d while allocating to non-syslogs object `%.*s'.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics can be run.
|
1111
|
20
|
Extent bitmap on allocation page %ld in database `%.*s' does not have extents marked that are being removed.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics can be run.
|
1112
|
20
|
Extent bitmap on allocation page %ld in database `%.*s' already has extents marked that are being added.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics can be run.
|
1113
|
20
|
Extent %ld already locked while allocating it in database `%.*s'.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics can be run.
|
1114
|
20
|
Attempt to resource lock page %ld in database `%.*s' by process %d failed because lock is already held by process %d.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics can be run.
|
1115
|
20
|
Attempt to transfer a resource lock to process ID 0 on allocation page %ld in database `%.*s'.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics can be run.
|
1116
|
20
|
Attempt to backout the allocation of LOG page %ld, in database `%.*s'.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics can be run.
|
1117
|
21
|
Extent chain for object %ld is not correctly linked.
Explanation: Refer to the writeup for this error.
|
1120
|
20
|
Adaptive Server failed to access page %ld in database ’%.*s’ because it is not an allocation page.
Explanation: Refer to the writeup for this error.
|
1122
|
20
|
Attempt to read allocation page before openning SYSALLOCPGS.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics can be run.
|
1123
|
20
|
Failed to get lock on OAM pg.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics can be run.
|
1124
|
20
|
Failed to get lock on allocation page %ld.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics can be run.
|
1125
|
20
|
Attempting to allocate page %ld in database %d to extent %ld which belongs to another object. Object id and index id in page are %ld, %ld. Object id and index id in extent are %ld, %ld.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics can be run.
|
1127
|
20
|
Internal Error: The OAM has no room for new inserts. Check OAM for object %ld, index %d.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics can be run.
|
1128
|
22
|
The OAM entry for allocation page %ld is missing from the OAM which starts on page %ld.
Explanation: A table or index may be corrupt. Report the error to your
System Administrator. Adaptive Server must be restarted and dbcc
diagnostics run.
|
1129
|
10
|
The requested update to the OAM for object %ld, dbid %ld, index %d, oam page %ld, would cause a negative page count. allocation page: %ld, oamarray used: %ld, oamarray unused: %ld, deltaused: %ld, deltaunused: %ld, spid: %ld. Contact your System Admin.
Explanation: Refer to the writeup for this error.
|
1130
|
22
|
A dealloc log record has been detected which does not have an OAM page supplied.
Explanation: A table or index may be corrupt. Report the error to your
System Administrator. Adaptive Server must be restarted and dbcc
diagnostics run.
|
1131
|
22
|
The OAM for object %ld, index %d, oam page %ld, database=%d, is currently allocated to another object.
Explanation: See the writeup for Error 1131.
|
1132
|
22
|
Attempted to log allocation to the log.
Explanation: Report the error to your System Administrator. Adaptive Server
must be restarted.
|
1133
|
22
|
Page %ld was expected to be an OAM page for %ld and it is not.
Explanation: Refer to the writeup for this error.
|
1134
|
20
|
Failed to get lock on OAM page %ld. This should never happen.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so DBCC diagnostics can be run.
|
1135
|
10
|
Page %ld was given as a target page for allocation to object %ld index id %d and there is no entry in the OAM for this page. This may indicate corruption of the OAM. Please run checkalloc on database %.*s.
Explanation: There may be a potential problem with a database or database
object. Contact your System Administrator.
|
1136
|
21
|
`Please run the upgrade38 utility before attempting to upgrade your database to MP.'
Explanation: Adaptive Server encountered an internal error affecting all
processes using the current database. Report the error to your System
Administrator.
|
1137
|
21
|
`There is insufficient space in database %.*s to run this upgrade.'
Explanation: Adaptive Server encountered an internal error affecting all
processes using the current database. Report the error to your System
Administrator.
|
1138
|
21
|
`Failed to complete allocation of SYSGAMS in database %.*s.'
Explanation: Adaptive Server encountered an internal error affecting all
processes in the current database. Report the error to your System
Administrator. Adaptive Server must be restarted and dbcc diagnostics
run.
|
1139
|
20
|
Impossible deadlock on page mgr lock.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics can be run.
|
1140
|
20
|
`Page mgr lock should not already be held.'
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics can be run.
|
1141
|
20
|
Unexpected value returned to page manager routine: %ld.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics (tablealloc, checkalloc)
can be run.
|
1142
|
22
|
Invalid OAM Page %ld. Found pstat=0x%x, object=%ld, database=%d, indid=%d.
Explanation: Refer to the writeup for this error.
|
1143
|
22
|
Invalid OAM Page %ld. Expected object=%ld. Found object=%ld, database=%d, pstat=0x%x, indid=%d.
Explanation: Refer to the writeup for this error.
|
1144
|
21
|
Page number %ld is higher than the highest page in database `%.*s': %ld.
Explanation: Adaptive Server encountered an internal error affecting all
processes in the current database. Report the error to your System
Administrator. Adaptive Server must be restarted and dbcc diagnostics
run.
|
1145
|
20
|
ss %d was expected to hold logical lock on page %ld.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics (checkalloc, tablealloc)
can be run.
|
1146
|
20
|
Process %d was expected to hold logical lock on object %ld.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics (checkalloc, tablealloc)
can be run.
|
1147
|
20
|
Process %d trying to do a logged operation on a non-logged object %ld.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics can be run.
|
1148
|
16
|
Error: %d, Severity: %d, State: %dn
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
1149
|
21
|
A Log Run Deallocation routine was passed one or more bad parameters. The bad parameter is either %ld or %ld.
Explanation: Adaptive Server encountered an internal error affecting all
processes in the current database. Report the error to your System
Administrator. Adaptive Server must be restarted and dbcc diagnostics
run.
|
1150
|
20
|
Failed to get intent lock on object %ld.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics can be run.
|
1151
|
11
|
Object %ld passed to OAM builtin function no longer exists in database %d.
Explanation: An OAM-related system function such as ROWCNT was called
with incorrect arguments, or called for an object which has been
dropped.
|
1152
|
11
|
Page %ld passed to OAM builtin function is not an OAM page for object %ld in database %d.
Explanation: An OAM-related system function such as ROWCNT was called
with incorrect arguments.
|
1153
|
11
|
OAM page %ld passed to rowcnt function is an unallocated page in database %d.
Explanation: Check the arguments passed to the system function ROWCNT.
|
1154
|
16
|
WARNING!!! Attempt to do a prefetch of size %dK is not allowed. The prefetch request is reset to the maximum prefetch size of %dK.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
1155
|
20
|
Invalid page validation type, %d, requested for page %ld, object %S_OBJID, indid %d in database %S_DBID.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics can be run.
|
1156
|
20
|
Unable to update the page linkage status for the data only locked table %ld in database %d due to an internal error.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics can be run.
|
1157
|
10
|
Insert free space value %d in page header of DOL datapage %ld belonging to object id %ld in database ’%.*s’ is incorrect. It has been recomputed and is now %d.
Explanation: This is an informational message. Unless otherwise specified,
no action is required. Contact your System Administrator about any
warning issued in the message.
|