Number
|
Severity
|
Text and Explanation
|
10801
|
16
|
Invalid type configured for cache %s. Cache type can be one of default OR mixed OR log along with HK ignore but NOT just HK ignore alone.
Explanation: There may be possible corruption in a database or a database
object. Take any corrective action indicated by the message. Consult
the Adaptive Server System Administration Guide and the Troubleshooting
Guide.
|
10802
|
16
|
Configuration Error: Configuration Parameter `%s' cannot be changed to 1 when parameter `evaluated configuration' is set to 1.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10803
|
16
|
Configuration Error: Cannot set configuration parameter `evaluated configuration' to 1. Other Security related configuration parameters need to be set properly before this parameter can be changed to 1. Please contact a user with SSO role for help.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10807
|
16
|
The value of `max parallel degree' (`%d') cannot be less than the value of `max scan parallel degree' (`%d').
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10808
|
10
|
Use sp_configure to lower the value of `max scan parallel degree' or raise the value of `max parallel degree'.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10809
|
16
|
The value of `number of worker processes' (`%d') cannot be less than the value of `max parallel degree' (`%d').
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10810
|
16
|
Use sp_configure to lower the value of `max parallel degree' or raise the value of `number of worker processes'.
Explanation: Adaptive Server could not perform the requested action. Contact
your System Administrator.
|
10812
|
20
|
Auditing: Fatal erorr - could not truncate the audit table `%.*s'. This is an internal error.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics can be run.
|
10813
|
16
|
Audit table cannot be changed because the log device in the sybsecurity database is full.
Explanation: SSO is trying to change the current audit table number but
the log for sybsecurity is full.
|
10814
|
20
|
Auditing: Fatal error - could not get the name of the audit table with the object id `%d' to truncate it. This is an internal error.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Reconnect to Adaptive Server. Report the error
to your System Administrator so dbcc diagnostics can be run.
|
10815
|
16
|
The lock hashtable size must be a power of 2. You have specified a size of %d, which is not a power of 2. The next highest power of 2, %d, will be used instead.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10816
|
16
|
The value of the `dump on conditions' configuration parameter must be either 0 or 1.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10817
|
16
|
Configuration Error: Unknown cache replacement policy `%s' defined for cache `%s'.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10818
|
10
|
Warning: the value provided for `parallel_degree' (`%d') was less than the value of `scan_parallel_degree' (`%d'). The value of `scan_parallel_degree' has been adjusted to `%d'.
Explanation: This is an informational message. Unless otherwise specified,
no action is required. Contact your System Administrator about any
warning issued in the message.
|
10819
|
10
|
The value of `scan_parallel_degree' (`%d') cannot be larger than the value of `scan_parallel_degree' set by a calling procedure. The value `%d' is used.
Explanation: This is an informational message. Unless otherwise specified,
no action is required. Contact your System Administrator about any
warning issued in the message.
|
10820
|
10
|
The configuration option `%s' has been changed by `%s' from `%s' to `%s'.
Explanation: This is an informational message. Unless otherwise specified,
no action is required. Contact your System Administrator about any
warning issued in the message.
|
10821
|
16
|
The configuration option `%s' requires a character string.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10822
|
16
|
The string size of the configuration option `%s' must be less than `%d'.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10823
|
16
|
The specified memory, `%ldK', is not big enough to configure the configuration parameter, `%s', to a valid value.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10824
|
16
|
Illegal value `%s' specified for configuration option `%s'. The legal values are between `%ld' and `%ld'.
Explanation: You tried to read in a configuration file which contains
an alphanumeric value for an integer configuration parameter. Correct
the file entries.
|
10825
|
16
|
Configuration parameter, `%s', will consume more than %ld bytes of memory if configured at %ld.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10826
|
16
|
The value of the ’max memory’ parameter ’%ld’ is not high enough to set the other parameter values for the current SQL Server configuration.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10827
|
10
|
Warning: the value of the configuration parameter 'max scan parallel degree' has been set to %d. For optimal performance, a value no larger than 4 is recommended.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10828
|
10
|
Consider increasing the value of configuration parameter ’max memory’ or decreasing the value of configuration parameters causing significant memory consumption, such as ’number of user connections’.
Explanation: Refer to “Configuring Memory” in the System
Administration Guide for information on how Adaptive Server uses
memory.
|
10829
|
16
|
Adaptive Server cannot estimate the memory requirement. See the System Administration Guide for information about Adaptive Server memory requirement.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10830
|
16
|
Configuration parameter '%s' can be only 0 or 1.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10831
|
16
|
Configured 'number of cache partitions' ('%d') is illegal in cache '%s'. The value must be a power of '2' and between '%d' and '%d'.
Explanation:
|
10832
|
16
|
Each partitioned pool must be at least 256P. With the ’%d’ partitions we cannot configure this value for buffer pool (%dk) in cache (%s). Please configure a bigger pool or reduce the number of cache partitions.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10833
|
16
|
Cannot disable CIS Services as transaction coordination requires CIS Services to be enabled. Please disable transaction coordination first.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10834
|
16
|
Configuration parameter ’%s’ can not be enabled without license ’%s’.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10835
|
16
|
The license allows maximum %d engines only.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10836
|
16
|
Cannot ’enable ha’ as HA services require transaction coordination. Please enable transaction coordination first.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10837
|
16
|
Cannot ’enable ha’ as HA services require Omni services . Please enable Omni services first.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10838
|
16
|
Server is currently HA cluster configured. ASE HA Services can not be disabled.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10839
|
16
|
The User Log Cache has been configured too small. The minimum size of a user log cache is the max page size (in bytes) the server is using, which is %d Kilotyes for the current server.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10840
|
16
|
Memory grow failed for pool %s. Error code %d. This is possibly due to memory fragmentation. This pool may grow on demand. Please increase ’max memory’ and retry the configuration.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10841
|
16
|
The value of parameter ’max memory’ ’%ld’ cannot be less than the ’total logical memory’ size ’%ld’. Please reconfigure ’max memory’ to be greater than or equal to the total logical memory required.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10842
|
16
|
The value specified for configuration option ’%s’ ’%d’ may not be greater than the value ’%d’ specified for configuration option ’%s’.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10843
|
16
|
The value specified for configuration option ’number of engines at startup’ ’%d’ may not be greater than the number of available CPUs ’%d’.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10844
|
16
|
Cannot enable ’use ssl client cert auth’ configuration parameter.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10845
|
16
|
The maximum number of memory maps ’%d’ has been reached for ’%s’ pool. You will have to reboot the server to reconfigure ’%s’. You may be able to reconfigure other configuration parameters.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions. Take any corrective action indicated by message.
|
10846
|
16
|
Overflow error: The ’total logical memory’ ’%d’ (2k pages) required for the configuration exceeds the maximum size of memory available on a ’%d’ bit platform: ’%lu’ bytes. Please reduce the configuration values that are consuming large amounts of memory.
Explanation: Take corrective action indicated by message. Check the System Administration
Guide for discussion of how Adaptive Server uses memory.
|
10847
|
16
|
The Adaptive Server Enterprise Small Business Edition does not allow you to set this configuration parameter to a value higher than %d.
Explanation: Command failed due to invalid or illegal request. Check syntax, semantics,
and permissions.
|