Number
|
Severity
|
Text and Explanation
|
10301
|
14
|
Can't find database id for `%.*s'. Check that this database exists and re-run the command.
Explanation: Command failed. Check your Adaptive Server environment for
the object not found and re-enter the command with the correct name.
|
10302
|
14
|
Only the DBO of database `%S_DBID' or a user with System Administrator (SA) role can run this command.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10303
|
14
|
Object named `%.*s' not found; check sysobjects.
Explanation: Command failed. Check your Adaptive Server environment for
the object not found and re-enter the command with the correct name.
|
10304
|
14
|
Only the owner of object `%S_OBJID' or a user with System Administrator (SA) role can run this command.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10305
|
14
|
Datatype named %.*s not found in database `%.*s'; check systypes.
Explanation: Command failed. Check your Adaptive Server environment for
the object not found and re-enter the command with the correct name.
|
10306
|
14
|
You do not have the permission to use datatype named %.*s in database %.*s.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10307
|
14
|
Curread should dominate the label being used.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10308
|
14
|
Supplied label is invalid.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10309
|
14
|
Curwrite is not equal to the label at which write is attempted.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10310
|
14
|
Session labels dominance relationship has been violated by the label being used.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10311
|
14
|
You must use one of the Sybase-supplied auditing stored procedures to change audit options.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10312
|
14
|
The ad_hoc_audit builtin can only be called from the following stored procedures: sp_addauditrecord, sp_bindmsg, sp_unbindmsg, sp_bindefault, sp_unbindefault, sp_bindrule, sp_unbindrule, sp_addmessage, sp_dropmessage.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10313
|
14
|
The caller of the set_password builtin was not found! Password left unchanged.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10314
|
14
|
Only a person with System Security Officer (SSO) role can change another person's password.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10315
|
14
|
Invalid caller's password specified, password left unchanged.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10316
|
14
|
New password supplied is the same as the previous password. Please supply a different new password.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10317
|
14
|
The specified password is too short. Passwords must be at least %d character(s) long.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10318
|
14
|
Invalid user specified, password left unchanged.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10319
|
14
|
SET ROLE fails. The caller is not granted with the specified role. Please contact a user with System Security Officer (SSO) role for help.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10320
|
14
|
SET ROLE fails. The caller cannot assume the new user identity (uid) in the current database. Please contact a user with System Security Officer (SSO) role for help.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10321
|
14
|
Ad-hoc updates to system catalogs not enabled. A user with System Security Officer (SSO) role must reconfigure system to allow this.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10322
|
14
|
In a CREATE SCHEMA statement, the authorization id must match the current user name. The supplied authorization id, `%.*s', does not match the current user name, `%.*s'.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10323
|
14
|
You do not have the permission to use datatype id %d in database id %d.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10324
|
14
|
User `%.*s' not found in database `%S_DBID'.; check sysusers.
Explanation: Command failed. Check your Adaptive Server environment for
the object not found and re-enter the command with the correct name.
|
10325
|
14
|
Database named %.*s not found; check sysdatabases.
Explanation: Command failed. Check your Adaptive Server environment for
the object not found and re-enter the command with the correct name.
|
10326
|
14
|
Suspect object %S_OBJID, database %S_DBID found. Cannot execute query.
Explanation: Command failed due to invalid or illegal request. Adaptive
Server cannot perform the requested action. Take any corrective
action indicated by the message.
|
10327
|
14
|
Procedure %S_OBJID, database %S_DBID with labels found UNCERTIFIED. Cannot execute query.
Explanation: Command failed due to invalid or illegal request. Adaptive
Server cannot perform the requested action. Take any corrective
action indicated by the message.
|
10328
|
14
|
UNCERTIFIED object %S_OBJID, database %S_DBID accessed by CERTIFIED object %S_OBJID, database %S_DBID. Cannot execute query.
Explanation: Command failed due to invalid or illegal request. Adaptive
Server cannot perform the requested action. Take any corrective
action indicated by the message.
|
10329
|
14
|
Sysobjects entry NOT found for procedure buffer entry.
Explanation: Command failed due to invalid or illegal request. Adaptive
Server cannot perform the requested action. Take any corrective
action indicated by the message.
|
10330
|
14
|
%s permission denied on object %S_OBJID, database %S_DBID, owner %.*s
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10331
|
14
|
%s permission denied, database %S_DBID, owner %.*s
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10332
|
14
|
%s permission denied on column %.*s of object %S_OBJID, database %S_DBID, owner %.*s
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10333
|
14
|
Incorrect DBCC command: Please see the Commands Reference Manual for DBCC commands and options.
Explanation: Command failed due to invalid or illegal request. Adaptive
Server cannot perform the requested action. Take any corrective
action indicated by the message.
|
10334
|
14
|
Permission related internal error was encountered. Unable to continue execution.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10335
|
14
|
SET label (CURREAD, CURWRITE) failed because new value is an invalid label, or new value doesn't satisfy the dominance relationships among session labels.
Explanation: Command failed due to invalid or illegal request. Adaptive
Server cannot perform the requested action. Take any corrective
action indicated by the message.
|
10336
|
14
|
Permission denied. Only the Database Owner (DBO) or a user with the System Administrator (SA), System Security Officer (SSO), or Oper role can execute this command for database `%S_DBID'.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10337
|
16
|
Object `%S_OBJID' not found.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10338
|
14
|
Permission denied. User's curwrite does not match the sensitivity label of object `%S_OBJID'.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10339
|
16
|
Database ’%S_DBID’ not found.
Explanation: Adaptive Server could not perform the requested action. Contact
your System Administrator.
|
10340
|
14
|
Permission denied. User's curwrite does not match the sensitivity label of database `%S_DBID'.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10341
|
14
|
Only users with SA and SSO roles can run this dbcc dbrepair command for the database %S_DBID.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10342
|
14
|
Only users with SA and SSO roles can run this dbcc dbrepair command for the database %S_DBID.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10343
|
14
|
Permission denied. Only a user with curwrite set to @@data_low can perform the command `%.*s'.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10344
|
14
|
Permission denied. Only a user with curwrite set to @@data_high can perform the command `%.*s'.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10345
|
14
|
Permission denied. The user cannot insert into the object `%S_OBJID'.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10346
|
14
|
Permission denied. The user cannot insert into the object `%S_DBID'.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10347
|
14
|
Permission denied. The subject cannot see all the contents of the container object `%S_OBJID'.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10348
|
14
|
Permission denied. The subject cannot see all the contents of the container object database `%S_DBID'.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10349
|
14
|
Permission denied. Only a user with curread set to @@data_high can perform the command `%.*s'.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10350
|
14
|
Permission related internal error was encountered. Unable to continue execution.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10351
|
14
|
Server user id %d is not a valid user in database `%.*s'
Explanation: Command failed due to invalid or illegal request. Adaptive
Server cannot perform the requested action. Take any corrective
action indicated by the message.
|
10352
|
14
|
You can only use SELECT or SELECT INTO with the special table.
Explanation: Command failed due to invalid or illegal request. Adaptive
Server cannot perform the requested action. Take any corrective
action indicated by the message.
|
10353
|
14
|
You must have the following role(s) to execute this command/procedure: `%.*s' . Please contact a user with the appropriate role for help.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10354
|
14
|
Permission denied. You must be either the system administrator (SA), the database administrator (dbo), or the owner of this object to perform this operation.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10355
|
16
|
Changing certification state of object %S_OBJID, database %S_DBID to SUSPECT because of change in state of dependent object %.*s (previous object id %ld), database %S_DBID.
Explanation: There may be possible corruption in a database or a database
object. Take any corrective action indicated by the message. Consult
the Adaptive Server System Administration Guide and the Troubleshooting
Guide.
|
10356
|
14
|
Illegal datatype encountered; check systypes.
Explanation: Command failed due to invalid or illegal request. Adaptive
Server cannot perform the requested action. Take any corrective
action indicated by the message.
|
10357
|
14
|
Permission denied. User's curwrite does not match the sensitivity label of datatype named `%.*s' in database `%.*s'.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10358
|
14
|
Curread cannot be set below the current database's hurdle.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10359
|
18
|
The curread and curwrite labels of the Client do not equal the connection level for the remote Server.
Explanation: Command failed due to internal Adaptive Server problem. Perform
any diagnostic action indicated by message. Report the error to
your System Administrator.
|
10360
|
18
|
Site `%.*s' not found in sysservers.
Explanation: Command failed due to internal Adaptive Server problem. Perform
any diagnostic action indicated by message. Report the error to
your System Administrator.
|
10361
|
14
|
The attrib_notify() function can only be used from a system stored procedure or with ad hoc updates enabled.
Explanation: Check that the function is called from the allowed procedure.
|
10362
|
14
|
The logschema() built-in function can only be called from the following stored procedures: sp_rename, sp_setreplicate, sp_setreptable, sp_setrepproc.
Explanation: Check that the function is called from the allowed procedure.
|
10363
|
14
|
The built-in function '%.*s' can only be called from system stored procedures.
Explanation: Check that the function is called from the allowed procedure.
|
10364
|
14
|
Permission denied. You must either be the database/object owner or possess the following roles in order to perform this operation: '%.*s'.
Explanation: You do not have the permission to execute this command. Have
the object owner or a user with the needed role run this command.
|
10365
|
14
|
Permission denied. You must have '%s' access on the table to lock it in '%s' mode.
Explanation: Failure to execute command LOCK TABLE in either shared or
exclusive mode. Check permissions.
|
10366
|
14
|
System catalog updates are not allowed in transactions with %s as coordinator.
Explanation: Command failed due to invalid or illegal request. Adaptive
Server cannot perform the requested action. Take any corrective
action indicated by the message.
|
10367
|
14
|
Permission denied on the %s ACF built-in.
Explanation: You do not have permission to execute this command. Have the
object owner or a user with the needed role run this command.
|