Number
|
Severity
|
Text and Explanation
|
9201
|
20
|
%S_REPAGNT: Could not map OAM Page (%d) to object id, current marker (%d, %d).
Explanation: Internal error, affects current process. Contact your SA.
|
9202
|
20
|
%S_REPAGNT: Nested replicated stored procedure detected. Transaction log may be corrupt. Please contact SYBASE Technical Support. (current marker = %d, %d)
Explanation: Internal error, affects current process. Contact your SA.
|
9203
|
20
|
%S_REPAGNT: Encountered an End Transaction that was not in abort state while locating after image for Delete at (%d, %d), transaction = (%d, %d).
Explanation: Internal error, affects current process. Contact your SA.
|
9204
|
20
|
%S_REPAGNT: Could not locate schema for object with id = (%d), current marker (%d , %d).
Explanation: Internal error, affects current process. Contact your SA.
|
9205
|
20
|
%S_REPAGNT: A replicated End Stored Procedure Execution log record was found with out a Begin. Transaction log may be corrupt. Please contact SYBASE Technical Support. objid = (%d), current marker = (%d, %d)
Explanation: Internal error, affects current process. Contact your SA.
|
9206
|
20
|
%S_REPAGNT: Error initializing the Rep Agent. Could not set affinity to engine (% d).
Explanation:
|
9207
|
20
|
%S_REPAGNT: Could not re-read XCMDTEXT log record at (%d, %d), current marker (%d , %d).
Explanation: Internal error, affects current process. Contact your SA.
|
9208
|
20
|
%S_REPAGNT: Update detected within a subscribable function. Transaction log may be corrupt. Please contact SYBASE Technical Support. (current marker = (%d, %d)).
Explanation: Internal error, affects current process. Contact your SA.
|
9209
|
20
|
%S_REPAGNT: Missing datarow in TEXT/IMAGE insert log record. Transaction log may be corrupt. Please contact SYBASE Technical Support. (current marker = (%d, %d)).
Explanation: Internal error, affects current process. Contact your SA.
|
9210
|
20
|
%S_REPAGNT: Fatal error from CT-Lib. (CT-Lib command = %s, return status = %d).
Explanation: Internal error, affects current process. Contact your SA.
|
9211
|
20
|
%S_REPAGNT: Received the following error message from the Replication Server: Msg %ld. %.*s.
Explanation: Internal error, affects current process. Contact your SA.
|
9212
|
20
|
%S_REPAGNT: Received the following communications error message: Msg %s: %.*s.
Explanation: Internal error, affects current process. Contact your SA.
|
9213
|
16
|
%S_REPAGNT: The version of this Rep Agent, is not supported by the Replication Server specified. After fixing this problem, restart the Rep Agent for this database. (Rep Agent version = %d, Rep Server version = %d, Rep Server = %.*s).
Explanation: Adaptive Server could not perform the requested action. Contact
your System Administrator.
|
9214
|
16
|
%S_REPAGNT: Failed to connect to Replication Server. Please check the Replication Server, username, and password specified to sp_config_rep_agent. RepSvr = %.*s, user = %. *s).
Explanation: Check your replication environment as recommended.
|
9215
|
16
|
%S_REPAGNT: The Secondary Truncation Point is not valid. Please make sure that the Secondary Truncation Point is valid, and then restart the Rep Agent Thread for this data base.
Explanation: Take recommended action.
|
9216
|
10
|
%S_REPAGNT: The Rep Agent Thread will retry the connection to the Replication Server every %d second(s). (RepSvr = %.*s).
Explanation: Informational message.
|
9217
|
10
|
%S_REPAGNT: Trace log file set to `%s'.
Explanation: Informational message.
|
9218
|
16
|
Database %S_DBID has not been enabled yet for an integrated Rep Agent Thread. Run sp_enable_rep_agent() to enable the database.
Explanation:
|
9219
|
20
|
%S_REPAGNT: Internal coding error.
Explanation: Internal error, affects current process. Contact your SA.
|
9220
|
16
|
%S_REPAGNT: The Rep Agent Thread context for database %S_DBID has already been reserved by another session.
Explanation:
|
9221
|
16
|
Parameter count/type mismatch. Please check the number and types of the parameters passed to the builtin function, '%.*s'.
Explanation:
|
9222
|
16
|
You must be SA, DBO, or have REPLICATION role to execute the builtin function, '% .*s'. Please check your current roles.
Explanation:
|
9223
|
16
|
Unknown operation, '%.*s', specified to builtin function rep_agent_admin(). Please check parameter spelling and placement.
Explanation:
|
9224
|
16
|
Unknown category, '%.*s', specified to builtin function rep_agent_config(). Please check parameter spelling and placement.
Explanation:
|
9225
|
16
|
Unknown property, '%.*s', specified to builtin function rep_agent_config(). Please check parameter spelling and placement.
Explanation:
|
9226
|
16
|
Database %S_DBID has already been enabled to use a Rep Agent thread.
Explanation:
|
9227
|
17
|
%S_REPAGNT. Could not allocate memory to spawn Rep Agent thread. (size=%d)
Explanation:
|
9228
|
17
|
%S_REPAGNT. Could not spawn Rep Agent Thread.
Explanation: There may be a memory-related or other resource problem.
|
9229
|
16
|
%S_REPAGNT. Could not change to database, %S_DBID.
Explanation: Check syntax and input data.
|
9230
|
16
|
The Rep Agent Thread for database, %S_DBID, is not running. Please retry this command after starting the Rep Agent Thread for this database.
Explanation:
|
9231
|
16
|
%S_REPAGNT. The Connect Dataserver name was not specified via 'sp_start_rep_agent ', nor was it found in sysattributes, or sysservers. Make sure that you have done a 'sp_ad dserver <svr>, local'.
Explanation: When generating the 'connect source' command for Replication
Server, the connect dataserver attribute could
not be determined. You can set connect dataserver attribute
directly with sp_start_rep_agent,
or configure it via sp_config_rep_agent.
This is only necessary if the requested dataserver is other than
the current dataservername. You must also do an 'sp_addserver
, local' in all cases.
|
9232
|
16
|
%S_REPAGNT. The Connect Database name was not found in sysattributes, or sysdatabases.
Explanation: When generating the 'connect source' command for Replication
Server, the connect dataserver attribute could
not be determined. You can set connect dataserver attribute
directly with sp_start_rep_agent,
or configure it via sp_config_rep_agent.
This is only necessary if the requested dataserver is other than
the current dataservername.
|
9233
|
17
|
%S_REPAGNT. Could not allocate %d bytes from the procedure cache. Please retry the last operation when more memory is available, or re-configure the server with a larger procedure cache.
Explanation: Command failed due to resource limitation. Modify the command
to fit available resources, retry when the resource is available,
or contact your System Administrator to address the resource problem.
|
9234
|
17
|
%S_REPAGNT. Could not start Rep Agent Thread.
Explanation:
|
9235
|
17
|
Could not allocate memory for gettrunc. Please retry gettrunc() later when more memory is available, or re-configure the server with a larger procedure cache.
Explanation:
|
9236
|
11
|
Unknown dbid '%d' specified. Please check the dbid specified.
Explanation: Check the value of the database ID specified in the query.
|
9237
|
16
|
%S_REPAGNT. The row for %.*s could not be found in sysattributes. Please check the configuration properties for this database with 'sp_config_rep_agent ' or 'sp_help_rep_agent'.
Explanation: This message is displayed when you have not configured a required RepAgent
attribute.
|
9238
|
16
|
Settrunc() is not permitted when a Rep Agent Thread is currently running on the database.
Explanation:
|
9239
|
17
|
%S_REPAGNT: Could not allocate a Procedure Cache for the Rep Agent Thread. Try restarting the Rep Agent Thread after freeing up, or allocating a larger Procedure Cache.
Explanation:
|
9240
|
17
|
%S_REPAGNT: Could not allocate an alarm. Try restarting this Rep Agent Thread after freeing up some alarms, or restart the server with more alarms allocated.
Explanation:
|
9241
|
20
|
%S_REPAGNT: Failure initializing the Rep Agent Context.
Explanation: Internal error, affects current process. Contact your SA.
|
9242
|
20
|
%S_REPAGNT: Underflow or overflow of state stack occurred.
Explanation: Internal error, affects current process. Contact your SA.
|
9243
|
20
|
%S_REPAGNT: Interface error with the Replication Server. The Rep Agent may not be compatible with the Replication Server.
Explanation: Internal error, affects current process. Contact your SA.
|
9245
|
20
|
Failure during update/insert/delete from sysattributes.
Explanation: Report this error to the System Administrator so dbcc diagnostics
can be run.
|
9249
|
17
|
Failed to reserve context in shared mode.
Explanation: Replication error. Contact your SA.
|
9250
|
10
|
%S_REPAGNT Failed to open trace file, '%.*s'. Trace messages will go to stdout of the server.
Explanation: Informational message.
|
9251
|
20
|
%S_REPAGNT Write to trace file, '%.*s', failed
Explanation: Internal error, affects current process. Contact your SA.
|
9252
|
20
|
Internal coding error in builtin function, '%.*s'.
Explanation: Contact Sybase Technical Support.
|
9253
|
20
|
Failed to get secondary truncation point.
Explanation: Internal error, affects current process. Contact your SA.
|
9254
|
20
|
%S_REPAGNT: Could not locate schema version for object id '%d' in the transaction log.
Explanation: Internal error, affects current process. Contact your SA.
|
9255
|
20
|
%S_REPAGNT: Rewrite of PREPARE log record failed at (%d, %d).
Explanation: Internal error, affects current process. Contact your SA.
|
9256
|
20
|
%S_REPAGNT: Could not read INOOP log record at (%d, %d), current marker (%d, %d).
Explanation: Internal error, affects current process. Contact your SA.
|
9257
|
20
|
%S_REPAGNT: Could not read ROWIMAGE log record at (%d, %d), current marker (%d, % d).
Explanation: Internal error, affects current process. Contact your SA.
|
9258
|
20
|
%S_REPAGNT: Could not re-read EXECBEGIN log record at (%d, %d), current marker (% d, %d).
Explanation: Internal error, affects current process. Contact your SA.
|
9259
|
20
|
%S_REPAGNT: Could not read TEXTINSERT/INOOPTEXT log record at (%d, %d), current marker (%d, %d).
Explanation: Internal error, affects current process. Contact your SA.
|
9261
|
20
|
%S_REPAGNT: This Rep Agent Thread is aborting due to an unrecoverable communications or Replication Server error.
Explanation: Internal error, affects current process. Contact your SA.
|
9262
|
16
|
Failed to start a Rep Agent Thread for the database specified because a Rep Agent Thread is already running for that database.
Explanation: Check replication environment.
|
9263
|
10
|
%S_REPAGNT: Turning Batch mode on.
Explanation:
|
9264
|
10
|
%S_REPAGNT: Turning Batch mode off.
Explanation: This is an informational message.
|
9265
|
10
|
%S_REPAGNT: Ignoring LTL errors.
Explanation: This is an informational message.
|
9266
|
10
|
%S_REPAGNT: Error in passthru packet: '%.*s'.
Explanation:
|
9267
|
20
|
%S_REPAGNT: A security mechanism was specified, but no security service(s) were specified. Please use 'sp_config_rep_agent' to specify which security service(s) to use when connecting to the Replication Server.
Explanation: Command failed due to invalid or illegal request. Check syntax,
semantics, and permissions. Take any corrective action indicated
by the message.
|
9268
|
20
|
%S_REPAGNT: The security service '%.*s' was specified, but it is not supported by the security mechanism. Please check the security service(s) and/or security mechanism specified to sp_config_rep_agent. (CT-lib error %d).
Explanation: Command failed due to invalid or illegal request. Check syntax,
semantics, and permissions. Take any corrective action indicated
by the message.
|
9269
|
20
|
%S_REPAGNT: Failure initializing the security mechanism '%.*s'. Please check the 'security mechanism' specified to sp_config_rep_agent. (CT-lib error % d).
Explanation: Check the security mechanism that was specified for connections
to the Replication Server.
|
9270
|
10
|
%S_REPAGNT: Using default security mechanism.
Explanation: This is an informational message. No action is required.
|
9271
|
20
|
%S_REPAGNT: Failure initializing the default security mechanism. Please check that a security mechanism has been properly configered. (CT-lib error %d)
Explanation: Check the default security mechanism set up for Replication
Server.
|
9272
|
20
|
%S_REPAGNT: Failure specifying the keytab filename. Please check that the keytab file '%.*s', exists and is accessable. (CT-lib error %d).
Explanation: Check the Replication Server setup indicated in the message.
|
9273
|
10
|
%S_REPAGNT: Using default keytab file because security mechanism requir es a keytab file, but the no keytab file was specified at server startup.
Explanation: This is an informational message. No action is required.
|
9274
|
16
|
Cannot disable the RepAgent thread for database %S_DBID, because the RepAgent is still running. Please stop the RepAgent on that database with 'sp_stop _rep_agent' before re-issuing 'sp_config_rep_agent disable'.
Explanation: Command failed due to invalid or illegal request. Take corrective
action indicated by the message.
|
9275
|
20
|
%S_REPAGNT: Could not locate the after image for the DELETE log record at (%d, %d).
Explanation: Adaptive Server encountered an internal error affecting the
current process. Report the error to your System Administrator.
|
9276
|
20
|
Error executing the command 'set proxy %.*s'.
Explanation: Failure to execute the command 'set proxy %.*s'
on the Replication Server. Report the error to your System Administrator.
|
9277
|
20
|
%S_REPAGNT: The security mechanism configured requires a keytab file. Check that the a keytab file was specified at server startup, and that 'use security services' has been configured.
Explanation: The RepAgent is initializing security services, and the mechanism
needs a keytab file. However it cannot locate the keytab file, either
because a keytab file was not specified at server startup, or because
'use security services' has not been configured yet.
|
9278
|
0
|
%S_REPAGNT: Encountered a feature that cannot be supported by the current Replication Server version. Upgrade the Replication Server version to a higher level, or use sp_config_rep_agent to set the ’skip unsupported features’ option.
Explanation: This is an informational message. No action is required.
|
9279
|
0
|
%S_REPAGNT: Connecting to a Replication Server that supports a lower LTL version. Features that are not supported by the lower LTL version may cause the RepAgent to shutdown. Set the ’skip unsupported features’ configuration option to prevent shutdown.
Explanation: This is an informational message. No action is required.
|
9280
|
10
|
%S_REPAGNT: Unable to start RepAgent on database %S_DBID, because that database has not been recovered and/or is not online. Please start the RepAgent manually using sp_start_rep_agent when it is ready.
Explanation: This is an informational message. No action is required.
|
9281
|
10
|
%S_REPAGNT: The Replication Server LTL version should be at least %d for full support of features. (Replication server LTL version %d, Rep Agent LTL version %d).
Explanation: This is an informational message. No action is required.
|
9282
|
20
|
%S_REPAGNT: No free file descriptors available.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Report the error to your System Administrator.
|
9283
|
20
|
%S_REPAGNT: Aborting because a cross database stored procedure execution was detected. This event needs to be manually applied, and skipped before restarting the RepAgent. (sproc dbid %d, sproc objid %ld, current marker (%d, %d))
Explanation: Adaptive Server encountered an internal error affecting the
current process. Report the error to your System Administrator.
|
9284
|
17
|
%S_REPAGNT. Could not allocate %d bytes from heap memory. You may need to re-configure with more memory.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Report the error to your System Administrator.
|
9285
|
17
|
%S_REPAGNT. The data at (%d, %d) is truncated because the Replication Server, ’%.*s’, cannot handle wide data. Check the ’data limits filter mode’ configuration parameter.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Report the error to your System Administrator.
|
9286
|
17
|
%S_REPAGNT. The data at (%d, %d) is too wide for the Replication Server, ’%.*s’, to handle. Check the ’data limits filter mode’ configuration parameter.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Report the error to your System Administrator.
|
9287
|
17
|
%S_REPAGNT. The data at (%d, %d) is skipped because it contains data wider than the Replication Server, ’%.*s’, can handle. Check the ’data limits filter mode’ configuration parameter.
Explanation: Adaptive Server encountered an internal error affecting the
current process. Report the error to your System Administrator.
|