Server Error Messages 2800–2899


 Bad procedure status: 0x%x.
 Both the tree and plan pointer are set; Ambiguous procedure.
 Bad pointer encountered during remapping: 0x%x.
 Stored procedure `%.*s' is out of sync with its own procedure header.
 Bad pointer 0x%lx encountered while remapping stored procedure `%.*s'.  Must re-create procedure.
 Stored procedure `%.*s' is corrupted.  Must re-create procedure.
 Process %d could not unlock stored procedure `%.*s' because the procedure is not currently locked by that process.
 Incorrect object structure returned from getobject.
 The request for %S_MSG `%.*s' failed because `%.*s' is a %S_MSG object.
 Cache reports negative usage count for procedure `%.*s'.
 Cannot create procedure dbid %d, objid %ld, with a group number of %d.
 Stored procedure `%.*s' not found. Specify owner.objectname or use sp_help to check whether the object exists (sp_help may produce lots of output).
 Procedure %.*s in procedure buffer 0x%lx not properly linked with procedure header 0x%lx.
 Procedure %.*s in procedure buffer 0x%lx does not contain the same object id as procedure header 0x%lx.
 Procedure %.*s in procedure buffer 0x%lx contains page address 0x%lx which is not aligned on a 2K boundary.
 Procedure %.*s in procedure buffer 0x%lx contains page address 0x%lx which is not within any memory map.
 Procedure %.*s in procedure buffer 0x%lx contains page address 0x%lx which should be allocated.
 You must provide both name and object id in order to install a procedure.
 You must provide both name and object id in order to remove a procedure.
 You must provide procedure buffer to remove the procedure %.*x.
 You must drop and recreate procedure %.*s.
 Bad version number encountered for procedure %.*s.
 Process %d tried to remove a PROC_BUF 0x%lx named `%.*s' that it does not hold in the hold procedure linked list.
 Process %d cannot hold PROC_BUF 0x%lx named `%.*s' because it holds another PROC_BUF 0x%lx named `%.*s'.  A process can only hold one view, rule, or default at a time.
 Process %d tried to remove a PROC_BUF 0x%lx named `%.*s' that it does not hold.
 Process %d has held the PROC_BUF 0x%lx named `%.*s' in the hold procedure linked list already; Check your procedure cache.
 Procedure `%.*s' in procedure buffer 0x%lx is not properly hashed.
 There are no more available procedure buffers. Configure your system for more.
 While cleaning up descriptor for object %d, a procedure buffer was found in use (use count = %d)
 Expected to find procedure buffer with usage count of %d and not %d.
 The procedure tree is old.  Use the sp_remap procedure to remap all the procedures in this database.
 The cursor `%.*s' is already tracking another procedure. This is an internal error.
 The object `%.*s' must be recompiled.  Use `sp_recompile %.*s', then rerun your command.
 Invalid procedure name
The text for the object '%.*s' is missing in syscomments. This object can not be accessed. 
The dynamic statement ’%.*s’ could not be found. This may be due to insufficient metadata descriptors for the number of tables and procedures in use by Adaptive Server. Configure the serverwide ’%s’ parameter to accommodate more objects.

Number	Severity	Text and Explanation
2801	20	Bad procedure status: 0x%x. Explanation: Adaptive Server encountered an internal error affecting the current process. Report the error to your System Administrator. (Not raised in Release 11.0 and higher.
2802	20	Both the tree and plan pointer are set; Ambiguous procedure. Explanation: Adaptive Server encountered an internal error affecting the current process. Report the error to your System Administrator. (Not raised in Release 11.0 and higher.
2803	20	Bad pointer encountered during remapping: 0x%x. Explanation: Adaptive Server encountered an internal error affecting the current process. Reconnect to Adaptive Server. Report the error to your System Administrator so dbcc diagnostics can be run.
2804	20	Stored procedure `%.s' is out of sync with its own procedure header. Explanation:* Adaptive Server encountered an internal error affecting the current process. Reconnect to Adaptive Server. Report the error to your System Administrator so dbcc diagnostics can be run.
2805	20	Bad pointer 0x%lx encountered while remapping stored procedure `%.s'. Must re-create procedure. Explanation:* Adaptive Server encountered an internal error affecting the current process. Reconnect to Adaptive Server. Report the error to your System Administrator so dbcc diagnostics can be run.
2806	20	Stored procedure `%.s' is corrupted. Must re-create procedure. Explanation:* See the writeup for Error 2806.
2807	18	Process %d could not unlock stored procedure `%.s' because the procedure is not currently locked by that process. Explanation:* Command failed due to internal Adaptive Server problem. Perform any diagnostic action indicated by message. Report the error to your System Administrator.
2808	18	Incorrect object structure returned from getobject. Explanation: Command failed due to internal Adaptive Server problem. Perform any diagnostic action indicated by message. Report the error to your System Administrator.
2809	18	The request for %S_MSG `%.s' failed because `%.s' is a %S_MSG object. Explanation: Command failed due to internal Adaptive Server problem. Perform any diagnostic action indicated by message. Report the error to your System Administrator.
2810	18	Cache reports negative usage count for procedure `%.s'. Explanation:* Command failed due to internal Adaptive Server problem. Perform any diagnostic action indicated by message. Report the error to your System Administrator.
2811	18	Cannot create procedure dbid %d, objid %ld, with a group number of %d. Explanation: Refer to the writeup for this error.
2812	16	Stored procedure `%.s' not found. Specify owner.objectname or use sp_help to check whether the object exists (sp_help may produce lots of output). Explanation:* Command failed due to invalid or illegal request. Check syntax, semantics, and permissions. Take any corrective action indicated by message.
2813	20	Procedure %.s in procedure buffer 0x%lx not properly linked with procedure header 0x%lx. Explanation:* Adaptive Server encountered an internal error affecting the current process. Report the error to your System Administrator. (Not raised in Release 11.0 and higher.
2814	20	Procedure %.s in procedure buffer 0x%lx does not contain the same object id as procedure header 0x%lx. Explanation:* Adaptive Server encountered an internal error affecting the current process. Reconnect to Adaptive Server. Report the error to your System Administrator so dbcc diagnostics can be run.
2815	20	Procedure %.s in procedure buffer 0x%lx contains page address 0x%lx which is not aligned on a 2K boundary. Explanation:* Adaptive Server encountered an internal error affecting the current process. Reconnect to Adaptive Server. Report the error to your System Administrator so dbcc diagnostics can be run.
2816	20	Procedure %.s in procedure buffer 0x%lx contains page address 0x%lx which is not within any memory map. Explanation:* Adaptive Server encountered an internal error affecting the current process. Report the error to your System Administrator. (Not raised in Release 11.0 and higher.
2817	20	Procedure %.s in procedure buffer 0x%lx contains page address 0x%lx which should be allocated. Explanation:* Adaptive Server encountered an internal error affecting the current process. Reconnect to Adaptive Server. Report the error to your System Administrator so dbcc diagnostics can be run.
2818	20	You must provide both name and object id in order to install a procedure. Explanation: Adaptive Server encountered an internal error affecting the current process. Reconnect to Adaptive Server. Report the error to your System Administrator so dbcc diagnostics can be run.
2819	20	You must provide both name and object id in order to remove a procedure. Explanation: Adaptive Server encountered an internal error affecting the current process. Reconnect to Adaptive Server. Report the error to your System Administrator so dbcc diagnostics can be run.
2820	20	You must provide procedure buffer to remove the procedure %.x. Explanation:* Adaptive Server encountered an internal error affecting the current process. Report the error to your System Administrator.
2821	16	You must drop and recreate procedure %.s. Explanation:* Command failed. Take indicated corrective action. You may need to drop/recreate triggers, rules and defaults for the table.
2822	20	Bad version number encountered for procedure %.s. Explanation:* Adaptive Server encountered an internal error affecting the current process. Reconnect to Adaptive Server. Report the error to your System Administrator so dbcc diagnostics can be run.
2823	20	Process %d tried to remove a PROC_BUF 0x%lx named `%.s' that it does not hold in the hold procedure linked list. Explanation:* Adaptive Server encountered an internal error affecting the current process. Report the error to your System Administrator.
2824	19	Process %d cannot hold PROC_BUF 0x%lx named `%.s' because it holds another PROC_BUF 0x%lx named `%.s'. A process can only hold one view, rule, or default at a time. Explanation: Command failed when a non-configurable limit was exceeded. Adaptive Server could not recover gracefully. Reconnect to Adaptive Server, and report the error to your System Administrator.
2825	20	Process %d tried to remove a PROC_BUF 0x%lx named `%.s' that it does not hold. Explanation:* Adaptive Server encountered an internal error affecting the current process. Reconnect to Adaptive Server. Report the error to your System Administrator so dbcc diagnostics can be run.
2826	20	Process %d has held the PROC_BUF 0x%lx named `%.s' in the hold procedure linked list already; Check your procedure cache. Explanation:* Adaptive Server encountered an internal error affecting the current process. Reconnect to Adaptive Server. Report the error to your System Administrator so dbcc diagnostics can be run.
2827	20	Procedure `%.s' in procedure buffer 0x%lx is not properly hashed. Explanation:* Adaptive Server encountered an internal error affecting the current process. Report the error to your System Administrator. (Not raised in Release 11.0 and higher.
2832	17	There are no more available procedure buffers. Configure your system for more. Explanation: Command failed due to resource limitation. Modify the command to fit available resources, retry when the resource is available, or contact your System Administrator to address the resource problem.
2833	26	While cleaning up descriptor for object %d, a procedure buffer was found in use (use count = %d) Explanation: An internal locking/synchronization rule was broken. Report the error to your System Administrator. Shut down and restart Adaptive Server.
2834	26	Expected to find procedure buffer with usage count of %d and not %d. Explanation: Incorrect count detected for a procedure buffer. Shut down and restart Adaptive Server to clear the error.
2835	16	The procedure tree is old. Use the sp_remap procedure to remap all the procedures in this database. Explanation: Refer to the writeup for this error.
2836	26	The cursor `%.s' is already tracking another procedure. This is an internal error. Explanation:* An internal locking/synchronization rule was broken. Report the error to your System Administrator. Shut down and restart Adaptive Server.
2837	16	The object `%.s' must be recompiled. Use `sp_recompile %.s', then rerun your command. Explanation: Adaptive Server could not perform the requested action. Contact your System Administrator.
2838	16	Invalid procedure name Explanation: Attempted to execute a stored procedure without specifying a procedure name. (Not raised in Release 11.0 and higher.)
2841	16	The text for the object '%.s' is missing in syscomments. This object can not be accessed. Explanation:* Check syntax and object name. .
2843	16	The dynamic statement ’%.s’ could not be found. This may be due to insufficient metadata descriptors for the number of tables and procedures in use by Adaptive Server. Configure the serverwide ’%s’ parameter to accommodate more objects. Explanation:* Query failed due to resource limitation. Take the recommended action.